[SOLVED] Out of Range Issue

[toxic5]

Hi everyone,
I am having an "Out of Range" issue on my monitor when I try to use my new GPU (MSI Radeon 5700 XT Gaming X). Initially I had a low profile GPU (Nvidia Geforce GT 710) to test my mobo and this worked fine. When my 5700 XT came, I used DDU to uninstall the Nvidia drivers and used the same PCI-E slot. The fans on my 5700 XT do spin.
Having the HDMI plugged when I turn on my computer provides an "Out of Range" issue and I am unable to go into safe mode or do anything else. I've also tried not having the HDMI cable plugged into my 5700 XT when turning on my PC and waiting a few seconds after to plug it in, but my monitor just shows a no signal. Also have tried to hard shutdown my computer several times to get to the Windows repair screen, but it never gets to that screen.
Anyone know how to resolve this?

PC Specs:
OS: Windows 10 Pro
Mobo: MSI B450M Bazooka Max Wifi
CPU: Ryzen 7 3700X
RAM: T-Force Vulkan Z 2x8 gb DDR4 3000
Storage: Inland Premium SSD m.2
PSU: Seasonic Focus GX 550W 80+ gold
Monitor: ASUS VA229HR 21.5" Frameless 1080P

 

[COLGeek]

Your PSU is significantly under-powered for your GPU. A 750w PSU is recommended:

https://www.msi.com/Graphics-card/Radeon-RX-5700-XT-GAMING-X/Specification

Have you tried using the display's menu to change the input settings?

 

[Quanticriver]

I second COLGeek

I had a similar issue a while ago, upgrading to a beefier PSU solved it for me

 

[toxic5]

Ahh I see, thought the 550W gold would be enough as I've seen many people say this would be more than enough power on Reddit for even more powerful builds (ex. here and here) and saw my estimated wattage on pcpartpicker lower than 400W. I will buy higher wattage PSU to try out then.

Have you tried using the display's menu to change the input settings?

When I get that screen, I cannot use any menu or do anything.
Thanks for the replies.