Good day Folks!
I need a good advice here. Two buildings are going to communicate to each other with high directional dish antennas (Outdoor Long-Range 11ac Access Point/Wireless Bridge). Each antenna has a bandwidth of 867Mbps. I need to get a throughput of 2Gbps in both directions. Three antennas on each building give 2.6Gbps.
I decided that there will be channel bonding - 80Mhz wide channels. In this case I can have 6 non-overlapping channels (lets assume it is DFS negotiated).
ch 36-48 (--------------) ch 52-64
ch 100-112 (--------------) ch 116-128
ch 132-144 (--------------) ch 149 - 161
Why I am doing this? Well, to avoid co-channel interference. I just assume that in this case I can achieve a throughput of 2Gbps, giving that each antenna is actually MU-MIMO (if this even possible in a Bridge mode with highly directional antennas).
Correct me if I'm completely wrong here... Thank you
I need a good advice here. Two buildings are going to communicate to each other with high directional dish antennas (Outdoor Long-Range 11ac Access Point/Wireless Bridge). Each antenna has a bandwidth of 867Mbps. I need to get a throughput of 2Gbps in both directions. Three antennas on each building give 2.6Gbps.
I decided that there will be channel bonding - 80Mhz wide channels. In this case I can have 6 non-overlapping channels (lets assume it is DFS negotiated).
ch 36-48 (--------------) ch 52-64
ch 100-112 (--------------) ch 116-128
ch 132-144 (--------------) ch 149 - 161
Why I am doing this? Well, to avoid co-channel interference. I just assume that in this case I can achieve a throughput of 2Gbps, giving that each antenna is actually MU-MIMO (if this even possible in a Bridge mode with highly directional antennas).
Correct me if I'm completely wrong here... Thank you