Oveclocking a 2600 to 4.1GHz, which voltage?

[lockstercarbz]

If I overclock a Ryzen 5 2600 to 4.1GHz, what will I need to increase the voltage to (there or there abouts)?

I’m also using the Wraith Stealth cooler by the way.

 

[Evvvvv]

If I overclock a Ryzen 5 2600 to 4.1GHz, what will I need to increase the voltage to (there or there abouts)?

I’m also using the Wraith Stealth cooler by the way.

Well it depends from chip to chip, check other OC guides and then set the voltage to that. If PC is stable, lower the voltage by 0.01... Then when you reach the sweetspot keep it there. If its not stable with that voltage, increase by 0.01 until stable.

 

[lockstercarbz]

How do I verify that it is stable?

 

[Evvvvv]

How do I verify that it is stable?

Prime 95, run small fft.

 

[lockstercarbz]

Thanks a lot!

 

[Evvvvv]

Thanks a lot!

But make sure to watch a few youtube vids of 2600 overclocks. They will be a ton of info, you can also run AIDA 64 to stress test it. If it crashes, it aint stable.

ALSO, if PC doesnt boot up, it means voltage is too small, so just go to bios and set it higher. If you cannot go to BIOS, clear CMOS, look how that is done aswell, since you might need it (but its a long shot, since you probably wont)!

 

[lockstercarbz]

Cool. Thanks!