Overclock me some more

[Guest]

Just bought a Kg7 LITE, AthlonXP 1700+, 400wpsu,256k of PC2100 crucial ram and a Taisol Coil of death(Heatsink).
I can clock up my setting in soft menu to 1466 @ above 13 multiplier (1700+) but can I clock the ram or make some change to the power setting in order to squeeze a bit more out. I`m currently running at 1.85v as this seems to keep the cpu temp down but to be honest, thats the only difference I can see.
Had a bit of a scary one where I cranked the FSB a bit high and that proceeded in no post. Thank god for the CMOS Reset!

 

[svol]

Check if your RAM is set at CAS 2.5 and raise the FSB a couple of MHz and check if it runs stable, if so higher it a little again, if not lower it a couple of MHz.

My case has so many fans that it hovers above the ground 😱 .