Hi All
I got a XFX GTX 294 card yesterday and your forum told me the reason my bench on 3D Mark Vantage is so low because of my cpu to small and I have to tweak my cpu to atleast 3Gz
My Specs:
GA-965P-DS4 v1 (Gigabyte) PCI x 16 expresss)
Intel Q6600 2.4Ghz
2 x 2 DDR II 800mhz Transcend ram(Dual Line)
XFX GTX 295 PCI 2.0
4 x Seagate 250 SATS II 32mb Raid o 9(onboard raid)
Vista 64 SP1
186.18 nvidia drivers.
PSU: 720W 46A GIGA BYTE
Bios Overclock: vF11
CPU Clk: x9
Frq: 333
Multiplier :2.5
Volttage: 1.275
(Multiplier does not have 2.4) so I used FRQ 320 to get Memory Frq to 800
PC works first time and on rebooot goes back to default. I even removed and replaced ram still the same.
Bios Overclock: vF11 (2nd attempt)
CPU Clk: x 8
Frq: 400
Multiplier: 2
Voltage:1.41875V
Just keeps rebooting and defaults again.
I really slipped up and dont have money to get another board and cpu and ram. Any help is much appreciated!
Thank you
I got a XFX GTX 294 card yesterday and your forum told me the reason my bench on 3D Mark Vantage is so low because of my cpu to small and I have to tweak my cpu to atleast 3Gz
My Specs:
GA-965P-DS4 v1 (Gigabyte) PCI x 16 expresss)
Intel Q6600 2.4Ghz
2 x 2 DDR II 800mhz Transcend ram(Dual Line)
XFX GTX 295 PCI 2.0
4 x Seagate 250 SATS II 32mb Raid o 9(onboard raid)
Vista 64 SP1
186.18 nvidia drivers.
PSU: 720W 46A GIGA BYTE
Bios Overclock: vF11
CPU Clk: x9
Frq: 333
Multiplier :2.5
Volttage: 1.275
(Multiplier does not have 2.4) so I used FRQ 320 to get Memory Frq to 800
PC works first time and on rebooot goes back to default. I even removed and replaced ram still the same.
Bios Overclock: vF11 (2nd attempt)
CPU Clk: x 8
Frq: 400
Multiplier: 2
Voltage:1.41875V
Just keeps rebooting and defaults again.
I really slipped up and dont have money to get another board and cpu and ram. Any help is much appreciated!
Thank you