- Sep 16, 2020
- 2
- 0
- 10
Hi there.
My ram won't run past 2133mhz, even through the RAM is meant for 3200.
My ram is VENGEANCE® LED 16GB (2 x 8GB) DDR4 DRAM 3200MHz C15 Memory Kit - White LED and my Motherboard is Sabertooth x99.
The BIOS version is up to date.
I've tired XMP option, and the computer will not post.
My overclocking settings are as followed:
DRAM Frequency: 3200MHz
DRAM Voltage CHA, CHB: 1.400
DRAM Voltage CHC, CHD: 1.400
DRAM CAS Latency: 16
DRAM RAS to CAS Delay: 16
DRAM RAS PRE Time: Auto
DRAM RAS ACT Time 36
DRAM Command Rate: Timing 2T
-
When I try these settings, the computer will turn on, however, the computer will not display post screen and eventually it will turn off.
Does anyone have any options?
My ram won't run past 2133mhz, even through the RAM is meant for 3200.
My ram is VENGEANCE® LED 16GB (2 x 8GB) DDR4 DRAM 3200MHz C15 Memory Kit - White LED and my Motherboard is Sabertooth x99.
The BIOS version is up to date.
I've tired XMP option, and the computer will not post.
My overclocking settings are as followed:
DRAM Frequency: 3200MHz
DRAM Voltage CHA, CHB: 1.400
DRAM Voltage CHC, CHD: 1.400
DRAM CAS Latency: 16
DRAM RAS to CAS Delay: 16
DRAM RAS PRE Time: Auto
DRAM RAS ACT Time 36
DRAM Command Rate: Timing 2T
-
When I try these settings, the computer will turn on, however, the computer will not display post screen and eventually it will turn off.
Does anyone have any options?
Facebook
Twitter
Instagram