Overclocking Kingston HyperX Predator DDR3 HX324C11PB3K2/16

[Fir33]

Hello
I can't find info about overclocking this RAM
http://www.kingston.com/datasheets/HX324C11PB3K2_16.pdf
Im using XMP 1 2400 mhz
Can i reach 2666 mh on this RAM ?
If yes please help me with timings .

 

[CountMike]

Hardly, depends on CPU and it's memory controller. Problem is that voltage and Cl would have to be higher and you'd loose some performance on it's account and end up with same performance. You would be better off just tightening (lowering) Cl and other timings.

 

[Fir33]

I already experiencing problems with my PC .
I made this thread http://www.tomshardware.co.uk/answers/id-3485234/overclocking-kingston-hyperx-savage-hx316c9srk2.html
After overclocking my previous RAM i gained huge improvement in gaming but when i turn off my PC it's boots automatically after 4 - 5 hours with Bios Recovery Screen .
I bought new RAM to get even better perfomances but looks like i made a mistake . I made memtest86 and new memory passed it without errors .
I think i will make new thread unless you will help with this issue .

 

[CountMike]

If you are able to run it at 2400MHz, don't bother trying any faster for reasons I stated above. There may be a good jump in performance from 1600 to 2400 but you are not going to see any in one step jump.

 

[Fir33]

Thanks for the answer
Any thoughts about my bios recovery screen after a while ?

 

[CountMike]

It might be set to sleep instead of full shutdown. Run this command "%windir%\System32\shutdown.exe -s -f -t 00" and see if it happens after that.