Overclocking my fx320

[RAZEE48]

So, currently i've been doing an overclock for my fx.
Now it's at 4.2ghz, with stock voltage 1.344v
Actually i'm new at overclocking, and i found a good tutorial how to overclock the fx cpu (https://www.youtube.com/watch?v=MckeAmnDeTk&t=757s). I do the same in that video and then i try to stress testing, and here is the result:

So i wonder is it good(stable) enough?
As you can see the temp goes up to 43c at full-load, idk if it's gonna increase more or not cz i do the stress testing for 6 min.
Should i keep this settings? or need to change for the most stable sett?
Idk if i want to bump it up to 4.5ghz, any recommended settings for 4.5ghz?
and how long should i stress test for knowing that this oc is stable?
cz i'll using this pc for about 10hours or more XD

Btw, my motherboard is Gigabyte GA-970a-D3P(rev 1.0) and the cooler Hydro H105 Extreme

 

[urbancamper]

1 pass is not enough to tell if it is stable. Run it for an hour at least. If it passes then it is good to go. 43c is not bad but it will heat up a lot more then that over an hour. As long as you keep it below 65c while stress testing your ok. However as a rule the FX series should not go above 62c.

All cpus clock differently. Main 2 things with the fx series are keep below 62c and vcore below 1.5v

At 72c the cpu will throttle down and anything above 62c will shorten its' life

 

[RAZEE48]

1 pass is not enough to tell if it is stable. Run it for an hour at least. If it passes then it is good to go. 43c is not bad but it will heat up a lot more then that over an hour. As long as you keep it below 65c while stress testing your ok. However as a rule the FX series should not go above 62c.

All cpus clock differently. Main 2 things with the fx series are keep blow 62c and vcore below .15v

Ahh okay, i'll stress test once again with the same settings for 30min or more i guess? if the max temp doesn't go above 62c then it's stable right?

 

[urbancamper]

If it doesn't crash it's stable. Did you raise the LLC?

 

[RAZEE48]

If it doesn't crash it's stable. Did you raise the LLC?

Load Line Calibration? i set it to normal i guess, cz the only available is Normal,Extreme,Medium,Low,Standard
It was auto before, so...

 

[urbancamper]

put it on medium if it is right below extreme. Whatever is just below extreme put it on that.

Hold on I did not read that it is on stock voltage. Could be that your do not have to change anything but the multiplier if you got that speed on stock voltage.

I ran my old FX8305 at 4.7

Validation for my old cpu. http://valid.x86.fr/tjcqcs

 

[RAZEE48]

So i don't have to put it on medium? alright then..
Wow, what cooler are you using?

 

[urbancamper]

I was using an h80i. As you can see have since move on to the other team. for all that overclock my 6600k still beat the FX 8350 fps wise in games. And that was before I overclocked my intel cpu.

 

[RAZEE48]

Max temp 49c? dope.
Yeah well, i'm considering upgrade to ryzen 1700x later maybe.

 

[RAZEE48]

I've run the stress test for hour and no crash no fail, max temp at 45.6c
but sometimes while the stress test running, the core speed drop to 1475Mhz, is that normal?

 

[urbancamper]

looks good. good luck to you.