Overclocking Pentium E2200 CPU

[Guest]

I have Pentium Dual core E2200 2.20Ghz
Ati HD 6450 1GB Asus low profile edition
4GB ram ddr2( 333MHz each)
PSU 450watt
Asus G31M S mobo whose rated FSB is 799MHz ,core voltage 1.33V multiplier x11 ,DRAM frequency 332.5 MHz,FSB DRAM 3.5 and max bandwidth.- PC2-5300(333Mhz).
I want to overclock it and have read tat this can be overclocked upto 3.2ghz. I want to do it to play games. Dont worrt about temps as i have put a COOLER beside cpu which is as effective as liquid cooling. ; p
I can take risks so plz tell me step wise step to overclock it and yet get a stable system. Also tell me about voltage adjustments etc if it is important.
DRAM tCL,DRAM tRCD,DRAM tRP,DRAM tRAS,DRAM voltage,NB voltage, +1.5 voltage,DRAM RCOMP setting all r on auto(if needed).

 

[unknownofprob]

firstly you can OC, and always the prime concern is heat and an unstable OC, you have the speed set which is stable and the cooler to have the CPU at good temps.

If you really want to take it to next level you will have to run your ram at 1:1 ratio that thing should go up to 3.8ghz no problem. intel recommends you don't go over 1.5volts so i wouldn't go to far past that but if you run your ram 1:1 you will be able to go much higher on less volts.

 

[Guest]

What is 1:1?? Is tat means having ram of identical frequency, clock speed n manufacturer?? I have both rams of everything same but diff manufacturer. And tell me steps to overclock it. I only know to increase the MHz of cpu n m noob bout voltage or other things.

 

[unknownofprob]

Read this for 1:1 ratio, otherwise i'll be here a while explaining;
http://www.overclockers.com/forums/showthread.php?t=608926

Overclocking, all you need to do is change the Speed in BIOS and up the voltage a bit, not a lot. I can't explain how your BIOS works as all suppliers are different, you may have to refer to your motherboard manual.