P4c800E-Deluxe

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

My MB no longer posts after flashing to the latest 1018 official BIOS. All
attempts to revive it have failed. I know I need the SN for the RMA, but I
do not possess the box the MB came in. Is the SN imprinted somewhere on the
board itself?

 

[Lazarus]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

There used to be an old trick you could do but I dont know if it works on
all boards

Here is a link for one of the boards it did work on.......what have you got
to lose now?

http://www3.telus.net/agentsmith/articles/article1.html



"Farkin.Bastage" <farkin.bastage@gmail.com> wrote in message
news:4v6dd.1861$UX3.1733@trndny03...
> My MB no longer posts after flashing to the latest 1018 official BIOS. All
> attempts to revive it have failed. I know I need the SN for the RMA, but I
> do not possess the box the MB came in. Is the SN imprinted somewhere on
the
> board itself?
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Usually, you can see a note glued onto the printer port; on
the note is the printed serial number of the board.

If you open the case, it is inside, just next to where the back-side shield
shall be.

HTMH

-------------
"Farkin.Bastage" <farkin.bastage@gmail.com> wrote in message
news:4v6dd.1861$UX3.1733@trndny03...
> My MB no longer posts after flashing to the latest 1018 official BIOS. All
> attempts to revive it have failed. I know I need the SN for the RMA, but I
> do not possess the box the MB came in. Is the SN imprinted somewhere on
the
> board itself?
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

"Farkin.Bastage" wrote
> My MB no longer posts after flashing to the latest 1018 official BIOS. All
> attempts to revive it have failed. I know I need the SN for the RMA, but I
> do not possess the box the MB came in. Is the SN imprinted somewhere on
> the board itself?


Hi,

you sure the board needs an RMA? I had a similar error with mine and it
turns out the graphics-card wasn't seated properly!

Did you try to clear CMOS and the regular stuff like that?
--
Wayne ][