Archived from groups: alt.comp.periphs.mainboard.asus (
More info?)
Salut Benoit,
first, use Symantec ghost to make an image of your existing drive and
partitions. Burn it on a DVD if possible.
second, Reformat the hard drive that is in use.
third, install your two harddrives in a raid configuration on the Promise
378 controller and create the raid array.
fourth, put your dvd disk in the dvd drive and install your ghost image.
Now, you might need to install the promise raid drivers again after the
ghost partition is applied.
Envoi moi un couriel est je t'aiderer
Richard
"Benoit T" <invalid@noos.fr> wrote in message
news:42332A89.FFA5E09A@noos.fr...
> Clark Griswold a écrit :
> >
> > "Benoit T" <invalid@noos.fr> wrote in message
> > news:42331DA2.343508DB@noos.fr...
> > > Hello,
> > >
> > > I have one 200 Gb Sata disk in Raid 1+0.
> > >
> > > Can I add a second 200 Gb disk, to make a real Raid 0 (or a Raid 1)
> > > without loosing the data on the original disk ?
> > >
> > > Does anyone ever tried that kind of stuff ???
> > >
> > > Thanks
> > >
> > > Benoit.
> >
> > Never tried it, but I doubt your data will stripe to each drive. Best
advice
> > is to read the manual.
>
> The manual says:
> with the Promise Raid you could duplicate one drive to make a raid 1
> nothing about stripping the datas on the second drive.
>
> Nothing about the ICH5R ...
>
> The only time I saw that kind of feature, it was with a
> Compaq SmartArray card.
>
> Transforming a raid 1 to a raid 5, by adding an other drive is rather
> nice !!! ...
>
> i'll try when I'll have a full offline backup ...
>
> Benoit.