P5GX-MX/1333 + E6750 Problem..Help plz..

[stef180]

Hi guys.I recently bought an ASUS P5GC-MX/1333 mobo with an Intel Dula Core E6750!Since i am o toal noob-newbie to o.c and general hardware,i have no intention to o.c!But here`s the prob. i have!It`s running soooo sloooowwwww! 🙁
On cpu-z it shows core voltage 1,280v and in core speed 1597,6!!Bus speed 266,1 multiplier 6 and sometimes it changes to x8 and core speed pumps up to 2128!I guess it`s cuase of the "auto" function in "oc" folder in bios?Donno...can someone help me plz?

 

[rgeist554]

It just reduces multiplier when it's not using all of it's processing power. Saves you some money on your electric bill. Also - there is a stick about OC'ing C2D chips in this forums... I suggest you take a peak at that.

 

[cfvh600]

Yes it is Intel Speedstep controlling your cpu's speed when it's not doing anything to save power.You can disable it in the BIOS if it bugs you.

 

[stef180]

I see...But whenever i run a speed test for the cpu the maximum i get is 2,1 🙁i used ORTHOS and while cpu was 100% the max speed was 2,1!Should`nt it get higher speeds?Or even at least the 2,66 which is the base speed for the cpu?

 

[stef180]

I followed the stick u said RGEIST554,and i shorted out some things!now i get 2,6 Mhz on cpu when stressing it with orthos!It should go 2,6 when stressing in 100% usage no?ty in advance (i haven`t figured out how to change the volts to oc since in my bios it has no such mode)