- Oct 6, 2004
- 63
- 0
- 18,630
Guys, it's been a long time and everything was going well until the other day.
My P5Q Deluxe suddenly gave me *** and I'm a bit baffled as to what to do.
Every time I boot it up a series of errors appear in order:
CPU Fan Error!
CPU Over Voltage Error!
System has a new processor installed...(something about resetting everything)
and finally, Fatal Error Chassis Intruded System Halted!
I'm stumped...
I go in to the bios and it's a bit odd. Hardware monitor shows a cpu temp of -1 degrees C and a board temp of 0 degrees C. It's not showing any fan speed and the voltages are all showing red...3.3v is 4.5 and 12v is showing as 14v etc. etc.
Finally, I can boot the machine but only after I clear the cmos which I can't be arsed doing every time for obvious reasons.
Any help would be appreciated.
Setup is
P5Q Deluxe
Q9450 @ 2.66
8GB Corsair Dominator 8500
Corsair TX750 PSU
2 x HiS 4870's crossfire
2 barracuda 750gb
My P5Q Deluxe suddenly gave me *** and I'm a bit baffled as to what to do.
Every time I boot it up a series of errors appear in order:
CPU Fan Error!
CPU Over Voltage Error!
System has a new processor installed...(something about resetting everything)
and finally, Fatal Error Chassis Intruded System Halted!
I'm stumped...
I go in to the bios and it's a bit odd. Hardware monitor shows a cpu temp of -1 degrees C and a board temp of 0 degrees C. It's not showing any fan speed and the voltages are all showing red...3.3v is 4.5 and 12v is showing as 14v etc. etc.
Finally, I can boot the machine but only after I clear the cmos which I can't be arsed doing every time for obvious reasons.
Any help would be appreciated.
Setup is
P5Q Deluxe
Q9450 @ 2.66
8GB Corsair Dominator 8500
Corsair TX750 PSU
2 x HiS 4870's crossfire
2 barracuda 750gb
Facebook
Twitter
Instagram