P8Z77-V boots only once after removing MB battery

4nepal2nepal

Reputable
May 9, 2014
3
0
4,520
I had problems with this motherboad. Recently integrated videocard stopped working. I bought GeForce 210 and that fixed the issue. For a while. Yesterday I tried to do an Auto Overclocking using AI program and now the PC doesn't boot. I tried removing the motherboard battery. Then I get: "Please enter setup to recover BIOS setting. Press F1 to Run SETUP" Then when I change all settings in BIOS to Normal and reboot I only see the black screen, no BIOS, nothing. The only time when I again see something is when I remove the battery again and then I see the same message as I said above. Boot Device Red LED is burning. I pressed MemOK button. It didn't help. What could it be? Does it mean that I have to change the motherboard?

 
Solution
SOLVED!
Praise God!
Buddy Dink's solution for similar thread:

It was the front panel connector. I explained the symptoms to my father (my father programs boards for new power tools) and he said it sounded like the computer was 'stuck' in reset, as if the connection for the reset pins was always there. I removed the front panel connector and used a paper clip to turn the pc on (using the proper pins) and it works perfectly. I can turn the computer on with the paper clip and turn it off with via the OS and when I but it up I still have video!!!

So what I did I disconnected the reset from motherboard and now everything works perfectly. Perhaps I shouldn't overclock it anymore.
SOLVED!
Praise God!
Buddy Dink's solution for similar thread:

It was the front panel connector. I explained the symptoms to my father (my father programs boards for new power tools) and he said it sounded like the computer was 'stuck' in reset, as if the connection for the reset pins was always there. I removed the front panel connector and used a paper clip to turn the pc on (using the proper pins) and it works perfectly. I can turn the computer on with the paper clip and turn it off with via the OS and when I but it up I still have video!!!

So what I did I disconnected the reset from motherboard and now everything works perfectly. Perhaps I shouldn't overclock it anymore.
 
Solution