I have an Asus GTX 690 on a P8Z77-V Deluxe board in a WIP new build. This is new stuff to me pretty much, so I hooked up the two identical cables from the Corsair HX1050 PSU into the two matching sockets on the edge of the board (actually 4 cables because there are two small "offshoot plugs" that slip in on pins right next to the larger ones).
Assuming I did this correctly for the 690, what if I want to add a GTX Titan, am I out of luck, because I just used up the only two cables from the PSU that seem to be for powering video cards.
If this is the case, does this mean I should be looking for a PSU that has at least three of those video cables (2 for 690, one for Titan).
Assuming I did this correctly for the 690, what if I want to add a GTX Titan, am I out of luck, because I just used up the only two cables from the PSU that seem to be for powering video cards.
If this is the case, does this mean I should be looking for a PSU that has at least three of those video cables (2 for 690, one for Titan).
Facebook
Twitter
Instagram