Pac-1/Pac-2 pinout (where the hell is up)

G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

I read 3 different pinouts for this and up is in a different place for each
one (and none work).
Does anyone know where the real player 1 up is for the falcon pinout for a
pac-1/pac-2 board?
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Jason Souza <jsouza@verizon.net> wrote:
: I read 3 different pinouts for this and up is in a different place for each
: one (and none work).
: Does anyone know where the real player 1 up is for the falcon pinout for a
: pac-1/pac-2 board?

The pinouts on my site work.

--
Mark Spaeth mspaeth@mtl.mit.edu
50 Vassar St., #38.265 mspaeth@mit.edu
Cambridge, MA 02139
(617) 452-2354 http://rgvac.978.org/~mspaeth
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

I tried that... it must be something at the board level.
Everything else is working fine but player 1 up.

"Mark C. Spaeth" <mspaeth@plancherel.mit.edu> wrote in message
news:423335b5$0$563$b45e6eb0@senator-bedfellow.mit.edu...
> Jason Souza <jsouza@verizon.net> wrote:
> : I read 3 different pinouts for this and up is in a different place for
> each
> : one (and none work).
> : Does anyone know where the real player 1 up is for the falcon pinout for
> a
> : pac-1/pac-2 board?
>
> The pinouts on my site work.
>
> --
> Mark Spaeth mspaeth@mtl.mit.edu
> 50 Vassar St., #38.265 mspaeth@mit.edu
> Cambridge, MA 02139
> (617) 452-2354 http://rgvac.978.org/~mspaeth
>
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

I got it to work (It did not match any I found online)

PARTS SIDE | SOLDER SIDE
-------------------------------|--------------------------------------
Gnd | A | 1 | Gnd
--------------- ------------|---|---|----------------------------------
(video) Gnd | B | 2 | Gnd
----------------------------|---|---|----------------------------------
Gnd | C | 3 | Gnd (controls)
---------------------- -----|---|---|----------------------------------
Spkr+ | D | 4 | Spkr-
----------------------------|---|---|----------------------------------
+12V | E | 5 | +12V
-------------- -------------|---|---|----------------------------------
| F | 6 |
----------------------------|---|---|----------------------------------
| H | 7 |
----------------------------|---|---|----------------------------------
| J | 8 |
----------------------------|---|---|----------------------------------
+5V | K | 9 | +5V
----------------------------|---|---|----------------------------------
P1 Down | L | 10|
----------------------------|---|---|----------------------------------
| M | 11|
----------------- ----------|---|---|----------------------------------
2P Start | N | 12|
----------------- ----------|---|---|----------------------------------
1P Start | P | 13| Coin Switch
----------------- ----------|---|---|----------------------------------
P1 Right | R | 14| P1 Up
----------------------------|---|---|----------------------------------
P1 Left | S | 15| Red
----------------------------|---|---|----------------------------------
Blue | T | 16|
----------------------------|---|---|----------------------------------
Green | U | 17|
----------------------------|---|---|----------------------------------
Neg CSync | V | 18|
---------------------------------------------------------------------------

"Jason Souza" <jsouza@verizon.net> wrote in message
news:_xFYd.569$qN3.325@trndny01...
>I read 3 different pinouts for this and up is in a different place for each
>one (and none work).
> Does anyone know where the real player 1 up is for the falcon pinout for a
> pac-1/pac-2 board?
>
>
>
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Sorry for the bad formatting, maybe this will come accross better

PARTS SIDE | SOLDER SIDE
Gnd | A | 1 | Gnd
(video) Gnd | B | 2 | Gnd
Gnd | C | 3 | Gnd (controls)
Spkr+ | D | 4 | Spkr-
+12V | E | 5 | +12V
| F | 6 |
| H | 7 |
| J | 8 |
+5V | K | 9 | +5V
P1 Down | L | 10|
| M | 11|
2P Start | N | 12|
1P Start | P | 13| Coin Switch
P1 Right | R | 14| P1 Up
P1 Left | S | 15| Red
Blue | T | 16|
Green | U | 17|
Neg CSync | V | 18|


"Jason Souza" <jsouza@verizon.net> wrote in message
news:JEHYd.1824$aS5.1303@trndny05...
>I got it to work (It did not match any I found online)
>
> PARTS SIDE | SOLDER SIDE
> -------------------------------|--------------------------------------
> Gnd | A | 1 | Gnd
> --------------- ------------|---|---|----------------------------------
> (video) Gnd | B | 2 | Gnd
> ----------------------------|---|---|----------------------------------
> Gnd | C | 3 | Gnd (controls)
> ---------------------- -----|---|---|----------------------------------
> Spkr+ | D | 4 | Spkr-
> ----------------------------|---|---|----------------------------------
> +12V | E | 5 | +12V
> -------------- -------------|---|---|----------------------------------
> | F | 6 |
> ----------------------------|---|---|----------------------------------
> | H | 7 |
> ----------------------------|---|---|----------------------------------
> | J | 8 |
> ----------------------------|---|---|----------------------------------
> +5V | K | 9 | +5V
> ----------------------------|---|---|----------------------------------
> P1 Down | L | 10|
> ----------------------------|---|---|----------------------------------
> | M | 11|
> ----------------- ----------|---|---|----------------------------------
> 2P Start | N | 12|
> ----------------- ----------|---|---|----------------------------------
> 1P Start | P | 13| Coin Switch
> ----------------- ----------|---|---|----------------------------------
> P1 Right | R | 14| P1 Up
> ----------------------------|---|---|----------------------------------
> P1 Left | S | 15| Red
> ----------------------------|---|---|----------------------------------
> Blue | T | 16|
> ----------------------------|---|---|----------------------------------
> Green | U | 17|
> ----------------------------|---|---|----------------------------------
> Neg CSync | V | 18|
> ---------------------------------------------------------------------------
>
> "Jason Souza" <jsouza@verizon.net> wrote in message
> news:_xFYd.569$qN3.325@trndny01...
>>I read 3 different pinouts for this and up is in a different place for
>>each one (and none work).
>> Does anyone know where the real player 1 up is for the falcon pinout for
>> a pac-1/pac-2 board?
>>
>>
>>
>
>