Pain in the neck

[ZionXylenes]

So my pc turns on but nothing else when connected to the power supply. If I disconnect the CPU from the psu everything turns on gpu,fans,CPU fans. But once I plug the CPU back in nothing turns on I just get a blank screen and a light that says the pc is on? I'm really confused and I'll elaborate if no one understood this is really getting on my nerves!!

 

[JackNaylorPE]

You lost me where you "disconnected the CPU from the PSU".

 

[ZionXylenes]

You lost me where you "disconnected the CPU from the PSU".

Thought so. I disconnected the cable which powers the CPU and then everything works the fans and whatnot. I reconnect the power to the CPU and now nothing turns on. Idk if that helps

 

[lakimens]

It might be causing some shorting.

 

[ZionXylenes]

It might be causing some shorting.

Can you further explain?

 

[lakimens]

When you plug the CPU power, it might be causing some shorting. Could be a problem with your Motherboard, if this is the case.
It would be helpful if you list your PC parts, including the PSU model.

 

[ZionXylenes]

When you plug the CPU power, it might be causing some shorting. Could be a problem with your Motherboard, if this is the case.
It would be helpful if you list your PC parts, including the PSU model.

Give me a list of what you want and I'll tel you guys

 

[JackNaylorPE]

Are you referring to the 4 pin / 8 pin EPS cable that plugs into the socket near the CPU ? Is the PSU big enough ? Does it have correct cables ? Have you used adapters ? Did you use correct cable ? Are you sure you put CPU in right ? Didn't bend any pins installing CPU ?

 

[lakimens]

How can you ask what we want? When you post a question, post your build..

 

[rgd1101]

MERGED QUESTION
Question from ZionXylenes : "My fans and gpu aren't getting power."

I have a gigabyte h110m-a connected to an evga 600w psu. My fans won't get power and my gpu either but my pc turns on. The fans are directly connected to the motherboard the strange thing is that some components receive power and others don't. how do I upload a pic from my phone so you guys could see.

 

[ZionXylenes]

Are you referring to the 4 pin / 8 pin EPS cable that plugs into the socket near the CPU ? Is the PSU big enough ? Does it have correct cables ? Have you used adapters ? Did you use correct cable ? Are you sure you put CPU in right ? Didn't bend any pins installing CPU ?

Yes it's the 4 pin EPs cable. The power supply is evga 600w. Yes I used correct cable. CPU is prebuilt so CyberPowerPC installed.

 

[ac13044]

what cpu do you have maybe is not compatible on your build please provide some specs

 

[ZionXylenes]

what cpu do you have maybe is not compatible on your build please provide some specs

It's a core i5 6400 it's compatible it wouldn't make sense for a prebuilt pc to come with a non compatible CPU. And it is my motherboard is a gigabyte ga-h110m-a

 

[ac13044]

ah right in your O/P didn't state that it was prebulit. you say that it was prebulit did you build it have you touched anything inside or messed about with any components could be the psu

 

[ZionXylenes]

ah right in your O/P didn't state that it was prebulit. you say that it was prebulit did you build it have you touched anything inside or messed about with any components could be the psu

I took out the power supply and put it a new one the evga 600w put in a msi gtx 1060 and that's about it. I plan to put a ssd in it in a few days. Idk if this helps pc is brand new never used so it could also be something else.

 

[JackNaylorPE]

Yes it's the 4 pin EPs cable. The power supply is evga 600w. Yes I used correct cable. CPU is prebuilt so CyberPowerPC installed.

You're under warranty ? Call up Tech Support and have them walk you thru it.

 

[ac13044]

ah ok just the psu was replaced try to plug the cable into the motherboard graphics just to see it it boots up

 

[ZionXylenes]

Yes it's the 4 pin EPs cable. The power supply is evga 600w. Yes I used correct cable. CPU is prebuilt so CyberPowerPC installed.

You're under warranty ? Call up Tech Support and have them walk you thru it.

To tell you truth I don't remember if I am. But I'll try

 

[ZionXylenes]

Yes it's the 4 pin EPs cable. The power supply is evga 600w. Yes I used correct cable. CPU is prebuilt so CyberPowerPC installed.

You're under warranty ? Call up Tech Support and have them walk you thru it.


[/
They said it's most likely my psu which makes no sense because it works fine and powers everything

 

[ZionXylenes]

what cpu do you have maybe is not compatible on your build please provide some specs http://www.mailmarke.com/

Again it is a core i5 6400 on a gigabyte ga-h110m-a. I used the pc once and for liek 10 min just to check if it was working then I went on to put in the new psu and gpu.

 

[ZionXylenes]

Could this be a faulty motherboard? I highly doubt because i used the pc for like 5 min before i went on to install a new psu and gpu. Ive been reading and it could be that im using the wrong eps cable or that the motherbord is faulty. Ive been looking into the msi h110m. Would i be having the same problems with that mobo??