Palit GT 630 2gigs

[rpvm45]

Hello,
I have actually a Palit 9800gt 1gig , should i change to the GT630 2 Gigs , as i still have a PC X16 bus on my mother board?
Thank you

 

[completelyrandomname]

http://www.tomshardware.com/forum/290969-33-advice-choosing
Could you please quickly fill this out? It will greatly help us help you.

 

[abbadon_34]

The 630 isn't much of an upgrade over the 9800, and the added memory is a little irrelevant on such a low end card.

See above for a fuller answer

 

[rpvm45]

Sorry i did not see it , before i posted my message.
APPROXIMATE PURCHASE DATE:no relevant

USAGE FROM MOST TO LEAST IMPORTANT:Flight Simulation X-PLANE , music , video...
CURRENT GPU AND POWER SUPPLY😛alit 9800GT 1G

OTHER RELEVANT SYSTEM SPECS:Mother Board MSI 785GT-E63 , 4Gigs DDR2 , ,Phenom II X4 3GHz

PREFERRED WEBSITE(S) FOR PARTS:no relevant

PARTS PREFERENCES:no relevant

OVERCLOCKING: Maybe

MONITOR RESOLUTION:2 Monitors 1680x1050


ADDITIONAL COMMENTS:no relevant

 

[completelyrandomname]

So you game on dual monitors? Or just the single 1680x1050 monitor and the other for Facebook? If so we still need to know how many amps are on your 12v rail. Don't say it's a Cooler Master or any other name, give us the amps on the 12v. What specific Phenom processor is that? Please clarify some of these things. I assume it's the Phenom II x4 965 and some PSU with around 500w power. You should be upgrading to ATLEAST a 7770 if you want to have a noticeable and good increase of performance.

http://www.newegg.com/Product/Product.aspx?Item=N82E16814102993
Get this card and be happy.

 

[completelyrandomname]

^ Remove that, it is irrelevant.

 

[mohit9206]

9800gt actaully is faster tahan gt 630. so you would actually be downgrading.
the only logical step up is the gtx 650 or 650ti or a radeon 7750

 

[rpvm45]

Phenom 2 x4 945 black, the problem is , i am in the Philippines and unless buying online , the choice is not big.if needed i'll change the psu.

 

[rpvm45]

and sorry , i am using x-plane on one monitor and a moving map on the other.

 

[rpvm45]

Another thing , the cards you are suggesting are using PCI express 2 or 3 , i have only 1 , so will there be a gain?

 

[abbadon_34]

PCI express is backwards compatible, and for these mid range cards in an x16 slot, difference is only a couple percent if that.

 

[Cons29]

dont worry, as far as i know those cards cannot saturate the bandwidth of your current pci-e

 

[completelyrandomname]

As far as bandwith goes is should be backwards compatible and the performance loss should be around 5%. As for a graphics card we still need to know how many amps are on your 12v. I highly recommend a 7770 and if you can find a GTX 650Ti for $130 US or less, go for it.

 

[rpvm45]

What about buying online?

 

[completelyrandomname]

What about buying online? I am not from the Philippines (in fact I'm Canadian), nor do I know any good websites to buy computer parts from. If someone else does and I'm sure someone will, please post some websites from buying there. I have tried to find some websites but they didn't seem legit.

 

[rpvm45]

Ok , something i forgot is to thank all of you for you answers and guidance...and my goodness , very fast , it almost like chatting.
Now , my PSU is Leadway PA4-550w
And the outs are:
5v,26Amps
3.3 , 14amps
+12 ,12amps
-5 , 0.5 amps
12 ,0.5amps
+5VSB ,2amps

 

[rpvm45]

regarding the 7770 , it seems to have only one DVI connector , how to connect the 2 monitors?

 

[abbadon_34]

That power supply is atrocious, closer to 150W, get a new one, Corsair, Seasonic, PC Power & Cooling, FSP. I would be afraid to connect anything to it, especially a card needing aux power.

For connections, just use an adapter to convert whatever you monitor needs with whatever the card outputs.

 

[completelyrandomname]

Definitely upgrade that power supply. It will NOT work with any decent graphics card.

 

[rpvm45]

That power supply is atrocious, closer to 150W, get a new one, Corsair, Seasonic, PC Power & Cooling, FSP. I would be afraid to connect anything to it, especially a card needing aux power.

For connections, just use an adapter to convert whatever you monitor needs with whatever the card outputs.

i mentionned 2 monitors , is there a split adaptor?

 

[abbadon_34]

The video card should have multiple outputs. It would be VERY unusual if it didn't. Just connect each monitor to a different output, doesn't really matter which, then adjust the settings to you usage in the card's control panel.

 

[rpvm45]

Continuing my investigation , i tried to overclock my 9800GT and check my FPS with a reference position in X-plane, the normal values are GPU 550mhz , Mem 900 Mhz and Shader 1375Mhz,i went until 640 , 1100,1375 , without any changes in the FPS so i tried to underclock , and no changes until i reached 400,600,1375,then from 28fps it goes down to 25 fps.
Does it means that my Grafic card is not the bottle neck of my system?phenom ii x4 945 deneb
ram ddr2 dual channel , unganged , NBF 2140 Mhz , DRAM freq =428Mhz