Hey guys,
Here is my problem...
current setup:
----------
SATA
rimary HDD (boots winXP)
PATA:secondary (non boot HDD)
PATAVD-RAM drive
---------
When connected like this all hardware is detected and shows in windows and on BIOS etc...BUT when in windows or even using a boot DVD the writer does not work.
In windows it prompts to enter a disk and on boot nothing happens at all, even when manually choosing it!
Any ideas on this?
p.s. i have tried alot of different jumper setups for the PATA drives with no luck BIOS is also up to date (im running an ASUS A8N-SLI deluxe mobo)
Cheers
Here is my problem...
current setup:
----------
SATA
rimary HDD (boots winXP)PATA:secondary (non boot HDD)
PATA
VD-RAM drive---------
When connected like this all hardware is detected and shows in windows and on BIOS etc...BUT when in windows or even using a boot DVD the writer does not work.
In windows it prompts to enter a disk and on boot nothing happens at all, even when manually choosing it!
Any ideas on this?
p.s. i have tried alot of different jumper setups for the PATA drives with no luck
BIOS is also up to date (im running an ASUS A8N-SLI deluxe mobo)Cheers
Facebook
Twitter
Instagram