Patriot Sector 5 memory on a z68 chipset?

[promoman9]

I'm looking into building an Intel i5-2500k system. I had gotten some RAM a few months back at a decent price that I was thinking to build around.

Patriot Sector 5 DDR3 4 GB (2 x 2 GB) PC3-16000 2000MHz 9-11-9-27 Enhanced Latency Dual Channel Kit PGV34G2000ELK
http://www.amazon.com/Patriot-PC3-16000-9-11-9-27-Enhanced-PGV34G2000ELK/dp/B002YGTS2E/ref=sr_1_sc_1?ie=UTF8&qid=1326120553&sr=8-1-spell

I have read on newegg that if this type of memory is not paired with a p55 chipset then it will not work even close to what it is supposed to. I'm not adverse to selling it if it won't work, just wondering if I need to or if it will work. Does anyone have any knowledge on this?

Thanks

 

[abekl]

The problem with this memory is that it is 1.65 volts, and you need memory that runs at 1.5 volts.

 

[sosofm]

If you install and manually fix the memory voltage at 1.5V your memory will not run at 2000Mhz.I had Kingston 2 X 2GB Hyper X 1600Mhz 1.65V. and i had no problem on P67 motherboard, set voltage at 1.5V and it was ok.