Pc boot looping when more than 1 ram stick used

Prodarkjjang

Reputable
Oct 1, 2015
6
0
4,510
Hi My pc specs are
-I7-6700
-GA z170 hd3p
-4x 4gb DDR4 hyperx fury Kingston ram(HX426C15FB/4)
-Msi GeForce gtx 960
-Corsair psu 600w

Basically the problem is when I attach two or more ram stick into my mobo it enter boot looping.
1) I checked all ram sticks and ram slots,works fine
2)updated bios to newest version,optimised default settings,still doesn't work
3)enabled XMP profile1(read from other post),doesn't work

What should I do to make sure all 4 ram stick can be attached and boot safely? All the parts are bought a week ago. It is my first time building a pc. Help is deeply appreciated!!
 
The ram sticks are recommended to me by the shopkeeper in separate boxes and I didn't know ram sticks can be bought in kits at that time, would be much careful next time.

I tried going to bios setting>advanced voltage settings>dram voltage control,but all the options inside are locked as auto

It shows
Dram voltage (ch a/b) 1.2v auto
Dram training voltage auto
Ddrvpp voltage 2.5v auto
Dram termination (ch a/b) 0.6v auto

On a side note, there's an advanced memory settings as well, where I can see
X.m.p
System memory multiplier
Memory boot mode
Memory enhancement settings
Memory timing mode
Channel a memory sub timings
Channel b memory sub timings