Long story short a pot of gravy fell on top of the pc (where fans were located). Mostly the fan was effected but I quickly dismantled the case and clean everything with some tissues. A small amount did land on top of the graphic card and I managed to clean it off.
After putting it back togther again I now get beep errors 1 long, 2 slightly shorter then nothing until I turn pc off. I get no display.
I have a video here. (Discord media link, should work hopefully)
https://media.discordapp.net/attachments/471583032382586910/865760130947088384/video0.mov
Any advice? I have done the following:
After putting it back togther again I now get beep errors 1 long, 2 slightly shorter then nothing until I turn pc off. I get no display.
I have a video here. (Discord media link, should work hopefully)
https://media.discordapp.net/attachments/471583032382586910/865760130947088384/video0.mov
Any advice? I have done the following:
- removed and re-attached RAM (tried other ports too)
- Removed and re-attached graphics card.
- Removed semos battery for a few hours then plugged it back in.