I am assembling a new desktop:
Cooler Master Elite 130 ->3600(INR)
Intel i5-4670K
MSI Z87I-AC ->24800 (both motherboard and processor)
Kingston HyperX (1600) (1 x 8 GB) ->4900
Seasonic SS400BT ->2475
Seagate Momentus 500 GB (5400 rpm)(SATA II) ( from old Laptop) ->free
APC Ups 600VA ->2300
Dell P2212H(1920 x 1080) (Already owned) ->free
Dell Kb212 Wired Usb Keyboard ->400
Logitech M100r ~>400
Primary use:
CAD Applications : CREO PARAMETRIC 2, SOLIDWORKS 2012 etc (Regularly)
Image editing: PhotoShop, Illustrator,Irfanview etc (occasionally)
Other: MS Office,Google Crome (Reports and research) (Heavy)
Secondary use:
Games(NFSMW,CS 1.6,MW),1080p Movies.
Query:
1. Is this a good build as a Entry level CAD Workstation ?
Do i need a SSD ? (may be (Intel 520 120gb)/Sandisk Ultra Plus 128 GB/Corsair force GS)
Is my laptop 2.5" HDD a serious bottleneck
Do i need a Quadro graphic card ?( I am still learning). (K600 or may be a Firepro)
2. Is it wise to get a 2 x 4 Gb RAM (Dual Channel )rather than 1x8 Gb(Single Channel) since there are only two slots on the board.
P.S. - The only reason i am making a mini-itx pc is that i can carry it to my college easily.
I wanted cooler master 110 cube mini-itx but it isn't available in my country and costs double if i import.
Also most of the good and new components are unavailable leading to poor configuration.(just like my dell TN based monitor)...:-(
Feel free to advice...
Cooler Master Elite 130 ->3600(INR)
Intel i5-4670K
MSI Z87I-AC ->24800 (both motherboard and processor)
Kingston HyperX (1600) (1 x 8 GB) ->4900
Seasonic SS400BT ->2475
Seagate Momentus 500 GB (5400 rpm)(SATA II) ( from old Laptop) ->free
APC Ups 600VA ->2300
Dell P2212H(1920 x 1080) (Already owned) ->free
Dell Kb212 Wired Usb Keyboard ->400
Logitech M100r ~>400
Primary use:
CAD Applications : CREO PARAMETRIC 2, SOLIDWORKS 2012 etc (Regularly)
Image editing: PhotoShop, Illustrator,Irfanview etc (occasionally)
Other: MS Office,Google Crome (Reports and research) (Heavy)
Secondary use:
Games(NFSMW,CS 1.6,MW),1080p Movies.
Query:
1. Is this a good build as a Entry level CAD Workstation ?
Do i need a SSD ? (may be (Intel 520 120gb)/Sandisk Ultra Plus 128 GB/Corsair force GS)
Is my laptop 2.5" HDD a serious bottleneck
Do i need a Quadro graphic card ?( I am still learning). (K600 or may be a Firepro)
2. Is it wise to get a 2 x 4 Gb RAM (Dual Channel )rather than 1x8 Gb(Single Channel) since there are only two slots on the board.
P.S. - The only reason i am making a mini-itx pc is that i can carry it to my college easily.
I wanted cooler master 110 cube mini-itx but it isn't available in my country and costs double if i import.
Also most of the good and new components are unavailable leading to poor configuration.(just like my dell TN based monitor)...:-(
Feel free to advice...