[SOLVED] PC build black screen in first boot

[fri77]

Hi
I bought the following components and I can't manage to make it work. I connected everything and all I have is a black screen.

Motherboard: aorus x470 ultra gaming
PU: Ryzen 2600
Memory: HyperX Predator DDR4 HX432C16PB3K2/16 - 16GB Kit (2x8GB) 3200MHz DDR4 CL16 DIMM
PU: EVGA power 110-BQ-0650-V2 650w
OS: none yet
Graphic card Asus dual 580
Western Digital WDS500G2B0B WD Blue 500GB 3D NAND Internal SSD M.2 SATA
Enermax Liqmax II 120S
Seagate Barracuda - HDD de TB (3,5, 64 MB caché SATA 6 GB/s up to 210 / Box NOX Hummer ZX Zero

I tried turning on with and without the graphic card, only one slot of ram and without the SSD but always black screen. I connect the hdmi to the one of the motherboard. There is four LEDs in the motherboard to show if something is wrong but it only gets the one of the graphic card in red as I didn't connect it.

Any advise? Thank you

 

[alexoiu]

Hi, The onboard graphics would not work with that CPU. You have to use a graphics card and connect the monitor to it, not to the motherboard.

 

[alceryes]

Intel Ryzen 2600, you say?

Unless is had a "G" at the end of the processor name it doesn't have integrated Vega graphics. So you have to use a discrete graphics card.
Try a minimal boot - CPU, 1 stick or RAM (be sure to put it in the correct slot), and graphics card. Be sure to plug the HDMI into the graphics card (not the motherboard port). See if you can at least POST and get into BIOS.

 

[fri77]

Hi, thank you, as it had an hdmi I thought it hard graphics integrated. I tried once with the Radeon 580 connected and the port there and it didn't work. I'll try again with only one slot of memory.

I think I got the right one (the ram) but I'm not sure. Once I connect everything, do I have to press something in the keyboard or put directly an usb with a OS or the first time it should boot to the bios directly?

Ps. Yes, I did an error in the description, it's a AMD Ryzon xD

 

[fri77]

I did branche thé Asus dual 580 graphip card but it doesn't work. The card has a small white led close to the power connector but the fans don't turn. The fans of the case and the liquid refrigeration works fine. This motherboard gas four LEDs and when I turned on they got on I the order up left, right down, up left right down and then all off.

Any ideas?

 

[alexoiu]

What video cable using for connecting the monitor to the graphics card?

 

[fri77]

looks like this motherboard does not have integrated graphics. the problem was in the ram, i changed to the slots 2-4 and now it works

thank you