Build Advice Pc build compatibility and input please!

[WillToLive]

https://pcpartpicker.com/user/WlllToLive/saved/dYRk6h This is the new PC build that i have put together and i was wondering if theres anything im missing for compatibility, if everything will fit, needed cables and also if the PSU will be sufficient, Planning on replacing stock fans for rad and case with fans in the list.

 

[PC Tailor]

What are you planning on using it for?

 

[momowicket]

First off you most likely will not need 6TB of storage, you can save some money there, in fact you'll probably never use more than 2TB, unless you have some plans for 6TB. The $95 for two fans is a bit over the top but your build looks like your trying to go all out with the most expensive of everything. The H115i cooler has pre applied thermal paste (pretty sure). Also instead of going with a cheaper Redragon keyboard (thats uses Outemu switches) you could get a mechanical keyboard with the higher quality and much more customisable Cherry MX switches (e.g Ducky One 2). You could get cheaper fans, less storage, maybe less ram and remove the thermal paste, and with that money snag another monitor (doesn't need to be the same one). The PSU will be just fine, in fact a little much but thats better than not playing it safe. The GPU is 300mm the case has clearance for a 380mm GPU. If you want to have a pump, reservoir combo the gpu might not fit in that case due to the pump res combo taking up space and blocking the GPU. Here is full list of it's specifications I copied and pasted - you can see them here - https://www.nzxt.com/products/h500-matte-white

Dimensions	W: 210mm H: 435mm D: 428mm (without feet) W: 210mm H: 460mm D: 428mm (with feet)
Material(s)	SGCC Steel and Tempered Glass
Weight	7 kg
Motherboard Support	Mini-ITX, MicroATX, and ATX
I/O Ports	2 x USB 3.1 Gen 1 1 x Audio/Mic
Filters	Front right side panel, bottom front and PSU intake
Expansion Slots	7
Drive Bays	2.5”: 2+1 3.5”: 2+1
Radiator Support	Front: Up to 280mm Rear: 120mm
Fan Support	Front: 2 x 120 / 2 x 140mm Top: 1 x 120mm (1 Aer F120 Case Version included) / 1 x 140mm Rear: 1 x 120mm (1 Aer F120 Case Version included)
Fan Specs	Aer F120 (Case Version) Speed: 1200 + 200 RPM Airflow: 50.42 CFM Noise: 28 dBA Bearing: Rifle Bearing
Clearance	Cable Management: 19-23mm GPU Clearance: Up to 381mm CPU Cooler: Up to 165mm Front Radiator: 60mm Rear Radiator: 60mm Reservoir & Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel)
Warranty	2 Years
Model Number	CA-H500B-W1
EAN	5060301694068
UPC	815671013750

 

[sizzling]

Don’t buy 2 kits of 2x8gb RAM, whenever you mix kits there is a risk of issues. Buy either a 4x8gb kit or 2x16gb kit.

 

[WillToLive]

What are you planning on using it for?

Gaming Primarily