PC Build Issue, Please Help

Oct 24, 2018
2
0
10
Hey Everyone,
Just built my first PC and fans come on, both Chassis and CPU. LED on the motherboard lights up but when I plug in an HDMI port to a monitor, no signal,

This is the build list, please let me know if you guys have any ideas thanks

-Intel - Core i7-6700K
-Cooler Master - Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
-Asus - H110M-A/M.2 Micro ATX LGA1151 Motherboard
-Corsair - Vengeance LPX 16GB (2 x 8GB) DDR4-2400 Memory
-HP SSD S700 2.5" 500GB SATA III 3D NAND Internal SSD 2DP99AA#ABC
-Corsair - 200R ATX Mid Tower Case
-Corsair - CXM 550W 80+ Bronze Certified Semi-Modular ATX Power Supply
No graphics card, this wasn't intended for gaming and the i7 was suppose to have a graphics card integrated i
https://drive.google.com/open?id=1wxKizNXKTsuEeNepzcjEFoeSu9euWzEV
https://drive.google.com/open?id=1R50WL4rGWoMUoruCvrOaey6OZtARJGif
https://drive.google.com/open?id=1gBF8k_xszizDAFlh8pIpytgdpxiEZEtz
https://drive.google.com/open?id=1Qv530lxui4CUU8xlsHEABFbbb2Pg5EXJ
https://drive.google.com/open?id=1KJcAVdPBPhSt8Nty9DoREW9C7J8ZKigx
https://drive.google.com/open?id=1uce6QwYTdcAM_bM71j5QiMQ0_rFO-Y0k
 
did you put any motherboard standoffs in your case? did you just lay the motherboard in there with the I/O shield? it doesnt look like there are any screws holding your MB in? so when you power on fans stay spinning right? it doesn't go into a boot loop and restart over there is just no display if I understand correctly?
 
Oct 24, 2018
2
0
10
Thank you for the reply everyone, and
And the motherboard is indeed screwed in. I haven't left it running for more than 30 seconds out of fear of something breaking. Also, apologies for my ignorance, but what is boot loop? And I don't hear any beeps at all when I turn it on...
no everything I installed was brand new, purchases mostly on Amazon.