Question PC Case Cable/Motherboard Help

[BeadyRoller]

Hi guys, I'm building a PC for my cousin who has an RGB case (Liam Li Lancool-II https://lian-li.com/product/lancool-ii/) and I've never dealt with RGB before so I'm unsure on where some of the cables are meant to be plugged in.

Motherboard used is a Gigabyte B550M DS3H mATx.

I've looked through the manual and watched YT videos but still not confident where they need to go. Heard some stories that if you plug RGB stuff in the wrong place it can ruin the board so a bit nervous 😢

Here's the pictures of said cables:

https://ibb.co/NK8JQVC

https://ibb.co/jZfm6QY

https://ibb.co/8DcNj5F

https://ibb.co/HzFMhvL

Any help would be appreciated, cheers!

 

[Lutfij]

This;

goes into the PSU's end.

This;

goes to the motherboard where you should see a header labelled D_LED1 or D_LED2 located at the top left corner and the bottom right of this image:

You can use your motherboard manual to locate the header stated above. Also, this;

is very likely to daisy chain other ARGB devices which will explain why there are pins and not holes underneath that sheath/cover.

 

[BeadyRoller]

Thanks very much for the reply @Lutfij

So I don't need to worry about the one with the plastic cover on?

Also what is the little white one (first image link)?

 

[hotaru.hino]

That white one looks like it plugs into the LED control board and judging by the diagram in the manual, it's probably for some other RGB connection type.

You likely don't need it.

 

[BeadyRoller]

That white one looks like it plugs into the LED control board and judging by the diagram in the manual, it's probably for some other RGB connection type.

You likely don't need it.

So I'm not going to need it to get any of the RGB working for the case?