[SOLVED] PC case with easy removable back gates or back plates.

[Alisom]

Hi there,
I'm talking about those annoying back plates in front of the PCIe slots who are stuck together, not easily detachable. You have to grab it and bend it back and forth 20 times until the welding breaks. Are out there cases with easy removable back plates? Please write down the model. Thank you.

 

[jeremyj_83]

Hi there,
I'm talking about those annoying back plates in front of the PCIe slots who are stuck together, not easily detachable. You have to grab it and bend it back and forth 20 times until the welding breaks. Are out there cases with easy removable back plates? Please write down the model. Thank you.

Pretty much any case that isn't a bargain basement case will have blanking plates that are easily removable either with standard screws of thumb screws.

Besides the blanking plates issue, what else are you looking for in a case?

 

[Alisom]

I need the model that has the back plates attached with screws. Thanks

 

[Gam3r01]

You will have to be a bit more specific than that, considering almost every consumer case has thumb screw attached PCIe covers.
Only super budget and OEM cases are still welded.

What budget do you have? Any special requirements (RGB, Side panels, etc)? Specs?

 

[Alisom]

ATX mid tower up to $80.

 

[Gam3r01]

Just a random assortment, with no other constraints:
https://pcpartpicker.com/products/compare/FCs8TW,w766Mp,b7hmP6/

 

[Alisom]

Gam3, Take a closer look at the back of the case. They are the same annoying welded together plates that need to be bent back and forth in order to be removed. Indeed the regular screws or thumb screws are there, but the plates just don't come off because they are stuck together and not cut individually all the way. Hope you get what I'm saying. They want you to buy the plates again.
https://www.amazon.com/Black-Cover-...nsion+slots+back+plates&qid=1583270657&sr=8-9

 

[jeremyj_83]

Gam3, Take a closer look at the back of the case. They are the same annoying welded together plates that need to be bent back and forth in order to be removed. Indeed the regular screws or thumb screws are there, but the plates just don't come off because they are stuck together and not cut individually all the way. Hope you get what I'm saying. They want you to buy the plates again.
https://www.amazon.com/Black-Cover-...nsion+slots+back+plates&qid=1583270657&sr=8-9

Look at Fractal Design's lines of cases. https://www.fractal-design.com/

 

[Gam3r01]

Not one of those cases I linked are spot welded in place.
Each expansion slot is a unique piece of metal that is individually removable.

 

[Alisom]

Look at Fractal Design's lines of cases. https://www.fractal-design.com/

Yes, Fractal looks like they have individual back plates that can be removed easily with the screw. Good choice.

 

[Alisom]

Not one of those cases I linked are spot welded in place.
Each expansion slot is a unique piece of metal that is individually removable.

Ok, let me check it further because the pictures are deceiving me right now.