PC Crashes everytime

[Ihal4u]

Recently I upgraded my pc. After updating, for a few days everything worked fine. I played most of the demanding fps's on ultra with playable frame rates. But from a few days, my games keep crashing whenever I play them on ultra on 1280x1024 (my monitor resolution). I checked the heat. My zotac gtx 660 goes to 60-75(max) degree centigrade and my fx 6300 goes to 40-50 degree centigrade max. Previously I thought that heat could be the problem. So now I keep my pc cabinet open and blow my table fan directly to the pc. So ventilation couldn't be the problem. I searched a different thread where it was suggested to clean sweep my driver and re-install a stable version. Well, now I am trying that and give the results later. In the meantime, if you guys could suggest anything.....

Games which I have problems with are Watch Dogs, CoD Ghosts, Skyrim (on extreme)
My rig:
AMD FX 6300
Zotac 660 2 GB synergy edition
Gigabyte 78LMT-USB3 mobo
ADATA 4 GB DDR3 RAM (1600Mhz) x 2
Corsair VS 550 PSU
WD Caviar 80 GB Desktop Internal Hard Drive (System)
Seagate Barracuda 500 GB Desktop Internal Hard Drive

 

[Scremin34Egl]

Can you elaborate on "crashing" ?, does it give an error message ?, restarts ?, BSOD's ?, or simply take you back to the desktop ?

 

[Ihal4u]

Can you elaborate on "crashing" ?, does it give an error message ?, restarts ?, BSOD's ?, or simply take you back to the desktop ?

While playing, the desktop gets covered with a gray (sometimes black) screen and my pc restarts! Before couple of minutes, I uninstalled the nVidia latest drivers and installed the drivers that came with my card but the problem persists... I even installed "Heaven DX11 Benchmark 3.0" to check whether its just game or what...but same result..my pc crashes ever running that in ultra too...though fps was good 47-74

 

[Scremin34Egl]

Run Prime95, Memtest to check for errors

 

[Ihal4u]

Run Prime95, Memtest to check for errors

Do I need to run my pc 24 hrs to check with Prime95? Isn't there a instant program? cause I know if i stress my pc, it will crash? Isn't my pc strong enough to run at 1280x1024 with ultra?

 

[Ihal4u]

Reports of WhoCrashed:

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Wed 7/16/2014 11:51:23 AM your computer crashed
crash dump file: C:\Windows\Minidump\071614-22744-01.dmp
uptime: 00:00:09
This was probably caused by the following module: ntkrnlmp.exe (nt!WheapCreateLiveTriageDump+0x6C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8007CEA038, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 7/16/2014 12:04:49 AM your computer crashed
crash dump file: C:\Windows\Minidump\071614-22869-01.dmp
uptime: 00:00:09
This was probably caused by the following module: ntkrnlmp.exe (nt!WheapCreateLiveTriageDump+0x6C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8007A018F8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 7/15/2014 11:11:38 PM your computer crashed
crash dump file: C:\Windows\Minidump\071514-21746-01.dmp
uptime: 00:00:08
This was probably caused by the following module: ntkrnlmp.exe (nt!WheapCreateLiveTriageDump+0x6C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA80079FE8F8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 7/15/2014 10:57:14 PM your computer crashed
crash dump file: C:\Windows\Minidump\071514-29172-01.dmp
uptime: 00:00:08
This was probably caused by the following module: ntkrnlmp.exe (nt!WheapCreateLiveTriageDump+0x6C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8007A368F8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 7/15/2014 1:14:04 PM your computer crashed
crash dump file: C:\Windows\Minidump\071514-21840-01.dmp
uptime: 00:00:08
This was probably caused by the following module: ntkrnlmp.exe (nt!WheapCreateLiveTriageDump+0x6C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA80079FA8F8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 7/9/2014 6:01:47 PM your computer crashed
crash dump file: C:\Windows\Minidump\070914-24772-01.dmp
uptime: 00:00:11
This was probably caused by the following module: ntkrnlmp.exe (nt!WheapCreateLiveTriageDump+0x6C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8007D56538, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 7/9/2014 3:53:04 PM your computer crashed
crash dump file: C:\Windows\Minidump\070914-22620-01.dmp
uptime: 00:00:10
This was probably caused by the following module: ntkrnlmp.exe (nt!WheapCreateLiveTriageDump+0x6C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8007D3A4C8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

 

[Scremin34Egl]

Run Prime95, Memtest to check for errors

Do I need to run my pc 24 hrs to check with Prime95? Isn't there a instant program? cause I know if i stress my pc, it will crash? Isn't my pc strong enough to run at 1280x1024 with ultra?

Did you run Memtest ?

 

[Ihal4u]

No, could it be the RAM? I mean my motherboard Gigabyte 78LMT-USB3 supports RAM upto 1333 Mhz whereas the RAM i installed are from ADATA 1600 Mhz. Is it possible that the RAM is causing the problem?

 

[Ihal4u]

Ok...now my motherboard got replaced by my seller...but the problem persists...no beep after connecting....then i brought another mobo asus m5a97 from my seller....but there is also no beep...fans and leds are on...i am not getting what is it is...i have two gpu's...amd 6670 and gtx 660...i connected both one by one...then also without gpu...without ram...but no beep...nothing...so could it be the power supply is faulty?

 

[Ihal4u]

no one intelligent enough here to solve my problem....and i thought its a computer geeks forum...dissapointed....

 

[Nyphrodel]

That's not a very nice thing to say when you're looking for FREE advice from people who volunteer to help others in their spare time. By the way, you disappeared for 2 weeks on 2 separate occasions between your posts and then come back expecting all your problems solved by others!?!? I suggest you close this thread, rewrite your post with a little more clarity, and try being a little more gracious next time.