[SOLVED] PC crashing when running PCIe 8x 3.0 lane, restarts at 1x 1.0 ?

Status
Not open for further replies.
Oct 12, 2024
5
1
15
Computer Type: Desktop
GPU: Video Card:EVGA RTX 3070 XC3 BLACK GAMING (08G-P5-3751)
CPU: AMD Ryzen 7 5700X3D (Former 3700x)
Motherboard: GIGABYTE B450M DS3H V2 (OEM locked by prebuilt, Unlocked via Modded efi flash)
BIOS Version: F67d [Issue present on all bios thus far]
RAM: 16GB Kingstonm KHX3200C
PSU: Deepcool DA700 [E tier] (1.5 yrs of use)
Case: Armory NZXT case
Operating System & Version: WINDOWS 11 PRO
GPU Drivers: GEFORCE GAME READY DRIVER - WHQL Driver Version: 560.94
Chipset Drivers: AMD Chipset driver 6.07.22.037

Background Applications: DISCORD, Brave

Description of Original Problem: PC is crashing when gaming (the finals) after 3-5 min, A good way to tell if it will crash is if the PCIe GPU bus is 8x 3.0 (which is what we want) as it then crashes and resarts system into a stable 1x 1.0 destorying the performance of the system. PC has no probelem Benchmarking, PC sometimes crashes while Stream/YT video is playing within the same time window as gaming all whille onn PICe 8x 3.0

Cannot move to lower slot as it heavily impacts performance. All I want is a stable 8x 3.0 PICE bus lane usage (cannot go x16 due to having an M.2 NVMe SSD installed)

Troubleshooting: Ive tried the following
  • Formating drives
  • Upgrading to W11 Pro from 10 Home
  • Taking out the GPU and cleaning the pins and cleaning the the PICE Socket 7 times.
  • DISM / Scans / Restore Health
  • Upgrading Bios from F64 -> F67b (latest) 1 by 1
  • Turning off XMP, Rebar
  • turning off Secure boot
  • Running BIOS at default settings
  • Turning off PBO
  • Under clocking GPU
  • Power testing using OCCT (1 crash that disappered when taking out all USB slots could not recreate)
  • Plugging out Sata connectors (cannot plug out NVME as its the boot drive)
  • DDU'd x2
  • Turning it on its side and attempting to burp it (also does not work please help)
 
Last edited by a moderator:

Lutfij

Titan
Moderator
Welcome to the forums, newcomer!

PSU: Deepcool DA700 [E tier] (1.5 yrs of use)
I would invest in something very close to Tier B since you have an RTX3070 in that build. I would source(borrow, not buy) a reliably built unit that has at least 750W of power at the entire system's disposal.

Upgrading to W11 Pro from 10 Home
Did you upgrade to Windows 11 using the internal upgrade path? If so, fabricate your bootable USB installer for Windows 11 and then format and reinstall the OS with only the drive you wish to install the OS on connected to the platform. Install the OS in offline mode, then manually install all relevant drivers in an elevated command. This means you have to download the latest drivers and have them on a removable drive(another pen drive).

Upgrading Bios from F64 -> F67b (latest) 1 by 1
Did you clear the CMOS after verifying your BIOS was successfully flashed to the latest version?

Motherboard: GIGABYTE B450M DS3H V2 (OEM locked by prebuilt, Unlocked via Modded efi flash)
Wait, is this a prebuilt akin to one made by iBuyPower/CypberPowerPC?
 
  • Like
Reactions: Kouldey
Oct 12, 2024
5
1
15
Welcome to the forums, newcomer!

PSU: Deepcool DA700 [E tier] (1.5 yrs of use)
I would invest in something very close to Tier B since you have an RTX3070 in that build. I would source(borrow, not buy) a reliably built unit that has at least 750W of power at the entire system's disposal.

Upgrading to W11 Pro from 10 Home
Did you upgrade to Windows 11 using the internal upgrade path? If so, fabricate your bootable USB installer for Windows 11 and then format and reinstall the OS with only the drive you wish to install the OS on connected to the platform. Install the OS in offline mode, then manually install all relevant drivers in an elevated command. This means you have to download the latest drivers and have them on a removable drive(another pen drive).

Upgrading Bios from F64 -> F67b (latest) 1 by 1
Did you clear the CMOS after verifying your BIOS was successfully flashed to the latest version?

Motherboard: GIGABYTE B450M DS3H V2 (OEM locked by prebuilt, Unlocked via Modded efi flash)
Wait, is this a prebuilt akin to one made by iBuyPower/CypberPowerPC?
Hi Lutfij, Cant source a New PSU sadly not even for testing, only recource would be to buy after a while, I did not use internal upgrade path, I used a bootable USB drive after formating and cleaning drives, But maybe I should clean again and install using bootable drive for drivers. altough I did 2 clean installs to the same issue.

I did clear the CMOS even pulled out the battery, Its a prebuilt from a canadian company called Armoury.
 

boju

Titan
Ambassador
M2 slot uses pcie 4x, cpu has 20 pcie lanes. I don't get why you're limited to 8x for the graphics card, should be 16.

I agree with psu, shouldn't be in there. Not adequate for power fluctuations the graphics card undergoes.

Take it back to prebuilt company if still have warranty.
 
  • Like
Reactions: Kouldey
Oct 12, 2024
5
1
15
M2 slot uses pcie 4x, cpu has 20 pcie lanes. I don't get why you're limited to 8x for the graphics card, should be 16.

I agree with psu, shouldn't be in there. Not adequate for power fluctuations the graphics card undergoes.

Take it back to prebuilt company if still have warranty.
Issue ended up being related to initial pre-built installation , the CPU cooler screws were too tight, warping the board and cutting connectivity of the GPU to the PCIe lanes.
You were right, I am now getting the full x16. surprised I only saw this after upgrading CPU.
 

boju

Titan
Ambassador
Issue ended up being related to initial pre-built installation , the CPU cooler screws were too tight, warping the board and cutting connectivity of the GPU to the PCIe lanes.
You were right, I am now getting the full x16. surprised I only saw this after upgrading CPU.

Wow nice catch. Yeah not surprised really, was only recently had someone with cpu cooling issues, 7800x3D idling in the mid to high 50s. Visited the firm who built it for them (time constrained so he couldn't build himself but has the knowledge) a couple of times, still the same. He fixed it himself after @SkyNetRising suggested checking if the heatsink plastic film was left on, it indeed was. The firm reseated the heatsink too, twice, neither times picked up on it.
 
  • Like
Reactions: Kouldey
Oct 12, 2024
5
1
15
Wow nice catch. Yeah not surprised really, was only recently had someone with cpu cooling issues, 7800x3D idling in the mid to high 50s. Visited the firm who built it for them (time constrained so he couldn't build himself but has the knowledge) a couple of times, still the same. He fixed it himself after @SkyNetRising suggested checking if the heatsink plastic film was left on, it indeed was. The firm reseated the heatsink too, twice, neither times picked up on it.
That is egregious haha, I like to think all these pre built company's leave this easter eggs behind for us to solve as a way of saying "Build your own PC" lmao
 
  • Like
Reactions: boju

boju

Titan
Ambassador
Should build your own, i do agree on that lol. The hands touching your computer could be a trainee, a Monday or Friday guy lol. Building computers for a job might be fun at the beginning but give it a few months or year, it becomes a chore and the care factor for quality over quantity is to the way side.
 
Status
Not open for further replies.