Question PC Display Showing Nothing after CPU Upgrade.

[Eliminator_v]

My PC has been working fine for a long time, monitor works, ect.
I pulled my old Ryzen 5 1600 from my PC and put in a Ryzen 7 2700 into it.
When I boot up nothing shows on the monitor, I tried 2 different monitors, tested that they work on other systems, all fine.

I tried putting the old CPU back, system still won't come up at all.
There are no beeps or anything when I turn it on.

I tried pulling out the battery to reset the BIOS, tried moving the ram around and booting without it, nothing at all.

I am kind of lost at this point, have no idea where to go from here.

Specs:
Ryzen 5 1600
Prime B350-Plus Asus
(Had a GTX 1070 Ti but pulled it for the on-board when the issue stared)
2 sticks of Vengeance LPX 8GB DDR4 ram.

 

[rgd1101]

ryzen don't have igpu. need the gtx 1070.
and did you update the motherboard bios to support 2700?

 

[Eliminator_v]

ryzen don't have igpu. need the gtx 1070.
and did you update the motherboard bios to support 2700?

How can I update it if the BIOS does not come up?

EDIT: I got it to come up with the card and old CPU, will try upgrading the BIOS now.

Yep, that was the issue, didn't know Ryzen didn't have igpu.