Build Advice Pc endless reboot. No video.

[MrHarambe]

So I finally gave in and built my own pc. This was a first for me so I’m not putting it past myself to have made a mistake somewhere even though I was slow and meticulous. Once completed I hooked it all up and turned it on. Well it turns on, but I get no video output and it restarts anywhere 15-30 seconds later. Not really sure where to start.

Any help is great.

https://pcpartpicker.com/list/6pyLMZ

 

[PC Tailor]

Welcome to the forums my friend!

Follow the steps in this guide first: Perform these steps first
Don't skip steps, even if you have done them previously, take your time and cover everything, then feedback.

It may be tedious, but it really does solve most problems.

 

[MrHarambe]

Welcome to the forums my friend!

Follow the steps in this guide first: Perform these steps first
Don't skip steps, even if you have done them previously, take your time and cover everything, then feedback.

It may be tedious, but it really does solve most problems.

I looked through there and didn’t see anything I could think of. I’m really stumped at kind of frustrated at this point. Wish I had someone near by that could give a hand.

 

[mdd1963]

Remove the GPU, and disconnect all drives, disconnect USB headers, and all SATA power/data cables...

all you need is power to MB (24 pin plus ATX12V CPU PWR (8 pin), you can use one stick of RAM in required slot.

Make sure sure a CPU cooler is connected to CPU FAN....

If rig powers on, your power switch is at least connected,,.(but, switch could also be ' stuck'!)

Now see if you get video using HDMI or DVI out of mainboard....