PC Fix plz..

[antodujak87]

Im having issues with my PC, I recently installed a new motherboard into my new case and my CPU is compatible with the MB. The problem is when I turn on my Computer I get zero signals on my two monitors who are both connected to the video card, my mouse and keyboard won’t start to light either, Really need to know what the problem is, im so depressed...

 

[Wolfshadw]

1) Would help if we knew what components you're working with. Also, what was the old motherboard?
2) Swapping the motherboard often requires a clean install of Windows. Did you do this?

-Wolf sends

 

[rgd1101]

go thru the check list http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
full system spec?

 

[antodujak87]

1) Would help if we knew what components you're working with. Also, what was the old motherboard?
2) Swapping the motherboard often requires a clean install of Windows. Did you do this?

-Wolf sends

Thanks for responding!
Motherboard: Asus Prime B250-Plus ATX
Intel Core i5-7500 3.4 GHz
EVGA GTX 1050 2gb
Some RAM from my old PC but it is 8gb

And my old Motherboard was a: m32cd_a_f_k20cd_k31cd

I did not do a clean install of windows because I don’t know how to do it and I didn’t even know you had to do that.

 

[Wolfshadw]

If this was a prebuilt system, it could have a proprietary motherboard with non-standard connections. Make sure the Front Panel cables are wired correctly. Do some research on the motherboard and power supply to make sure it's a standard ATX. Of course, make sure you have all the necessary motherboard connectors plugged in correctly, in particular, the 4+4pin CPU_PWR cable.

-Wolf sends

 

[antodujak87]

If this was a prebuilt system, it could have a proprietary motherboard with non-standard connections. Make sure the Front Panel cables are wired correctly. Do some research on the motherboard and power supply to make sure it's a standard ATX. Of course, make sure you have all the necessary motherboard connectors plugged in correctly, in particular, the 4+4pin CPU_PWR cable.

-Wolf sends

It was prebuilt but I removed some parts and put new stuff in but now when I got this case it just won’t boot, but I’ve put all the MB cables in the correct spots but I have to see if I put something in the wrong place. And Yes my PSU supports ATX as it has a ATX cable. But if I put the I/O cables in the wrong spots, should it not start because my pc starts and the LED cable for the I/O front panel lights up, so I don’t know the problem but i’ll do some more research and im gonna check my PC