[SOLVED] PC is not Posting after pressing power button

[daemon5566]

PC not turning on, after pressing the power button there is no Beep and the Arous Logo does not appear.

Specs.
8GB 2x Corsair Ram + 1x 16GB Corsair Ram.
RTX 3060 12gb Asus KO
Gigabyte X570 Arous Elite Rev 1.0
500GB NVME SSD + 1TB HDD
Ryzen 5 5600X
PSU : Coolermaster MWE 650W 80+ Bronze

I had cleaned my PC , I have properly reseated the Ram and the GPU.
I haven't Updated the BIOS (40d)
No adjustment to the CPU.
Still when I Turn On the PC, all the fans spin up, GPU lights up and CPU cooler fans are spinning. I haven't reseated the CPU only RAM and GPU. No beeps for any error neither any lights on the motherboard. It was working properly prior, no shorts any liquid damage. Also when Im pressing the power button there isn't hard shutdown too.
Please help.

 

[Lutfij]

8GB 2x Corsair Ram + 1x 16GB Corsair Ram.
Work with the 2x8GB kit alone, in slots A2 and B2. See if that helps. Can you pass on a link to the rams you're working with? As a side note, how far apart was the purchase for the rams? Inspect the PCB's revision on the ram sticks and report back to us with an image.

RTX 3060 12gb Asus KO
+
PSU : Coolermaster MWE 650W 80+ Bronze
How old is the PSU? Due to the RTX 3000 series high transient load spikes, users were asked to overprovision on their PSU's wattage, apart from buying into a reliably built unit. Might want to source(borrow, not buy) a higher wattage PSU that's reliably built and see if that alleviates the issue.

Your motherboard has a Q-Flash Plus button and a designated USB port on the rear, see if reflashing the BIOS helps if the above steps don't work for you. You can use this guide;

View: https://youtu.be/7cQLYROKJ_Q

different motherboard but the principle is the same.

Moved thread from Graphics cards section to Systems section.

 

[daemon5566]

8GB 2x Corsair Ram + 1x 16GB Corsair Ram.
Work with the 2x8GB kit alone, in slots A2 and B2. See if that helps. Can you pass on a link to the rams you're working with? As a side note, how far apart was the purchase for the rams? Inspect the PCB's revision on the ram sticks and report back to us with an image.

RTX 3060 12gb Asus KO
+
PSU : Coolermaster MWE 650W 80+ Bronze
How old is the PSU? Due to the RTX 3000 series high transient load spikes, users were asked to overprovision on their PSU's wattage, apart from buying into a reliably built unit. Might want to source(borrow, not buy) a higher wattage PSU that's reliably built and see if that alleviates the issue.

Your motherboard has a Q-Flash Plus button and a designated USB port on the rear, see if reflashing the BIOS helps if the above steps don't work for you. You can use this guide;

View: https://youtu.be/7cQLYROKJ_Q

different motherboard but the principle is the same.

Moved thread from Graphics cards section to Systems section.

Hey thanks for the guidance, but the system was working fine before the cleaning. Also its a 3060 so 650w psu is fine and its brand. The RAM is Corsair Vengence DDR4 also the system properly reported 32gb ram it was stable too

 

[Lutfij]

You didn't answer any of the questions I'd asked.

 

[daemon5566]

You didn't answer any of the questions I'd asked.

Inspect the PCB's revision on the ram sticks and report back to us with an image.
Sir I have no idea how to perform this. Also currently its midnight where im located, please can I ping you back tomorrow.

 

[Lutfij]

I have no idea how to perform this
You will need to host your images on a site akin to Imgur. You can look at my sig space, Image posting via Imgur.

 

[daemon5566]

Update:
I have removed everything from the PC ,
gpu, ssd, hdd, ram and powered it on.
Same no beeps or motherboard lights. Fans spin up and rgb comes up. That's it

 

[DaleH]

Hey thanks for the guidance, but the system was working fine before the cleaning. Also its a 3060 so 650w psu is fine and its brand. The RAM is Corsair Vengence DDR4 also the system properly reported 32gb ram it was stable too

You can't know the PSU is fine unless you can eliminate it by trying another one or by some other method.

 

[daemon5566]

Update
Issue has been solved, main issue was the mismatched ram I have reverted to using single 16gb stick. Thank you everyone for your time and guidance.