Question Pc keeps crashing after upgrades.

May 15, 2022
1
0
10
0
I7 11700K
2080 asus
NZXT Z490
Corsair vengeance 32GB 3600mhz

After upgrading my new motherboard I keep on crashing after turning on XMP.
I'm on my third set of ram sticks. Ive had contact with several sellers and NZXT itself for asking what ram i should use so i can enable XMP. Now i installed the new set of recomended ram and it still crashes. It goes in to a boot loob and after that it puts the ram at 2133 mhz. anyone tips how i can enable or even put my ram at 3200 mhz?
 

dudio

Distinguished
It's not clear what your previous motherboard was, and if you have done a full clean reinstall of Windows (a different motherboard requires a fresh install). It's not clear if it's the bios or Windows causing you the grief.
Also, what PSU do you have?
 
I7 11700K
2080 asus
NZXT Z490
Corsair vengeance 32GB 3600mhz

After upgrading my new motherboard I keep on crashing after turning on XMP.
I'm on my third set of ram sticks. Ive had contact with several sellers and NZXT itself for asking what ram i should use so i can enable XMP. Now i installed the new set of recomended ram and it still crashes. It goes in to a boot loob and after that it puts the ram at 2133 mhz. anyone tips how i can enable or even put my ram at 3200 mhz?
Post a link to the set of ram sticks.

Use just one stick of ram in the proper slot.
Enable xmp.
Does the pc boot and not crash?
 

ASK THE COMMUNITY