Pc keeps reboting after entering windows.

joerack

Distinguished
Sep 20, 2012
41
0
18,530
As the topic says, this is my problem.


I decided to bring it to the pc shop as it's under warranty.
So I give it to them with a note that I've encountered vram errors and 3 damaged sections with the hdd.
So they keep it for a week and check it and in the end their diagnosis is... Pc is dirty, needed to be cleaned up, now working perfectly.

Well I get to test it a few minutes and it is indeed working (not rebooting)
As soon as I bring it home, turn it on... BSOD.

So I run the same program they used (pc-check) and encounter these errors

https://www.dropbox.com/s/ljcceu6bwv4hcnb/error1.jpg
https://www.dropbox.com/s/ljhzfw50ieiem01/error2.jpg

Pc specs:
Qbex Udp atlas gold
Core I7 2600
Hd ST3100 1TB
Ram 8GB DDR3
Motherboard ECS H61H2-M2 (V1.0)
 
Your one RAM module appears to be defective. However before jumping to the conclusion, pl remove both modules, clean the DIMM slots. Start your PC with one module at a time and check it system works normally. Run the test again using one module at a time. If everything works out plug in both and run test again, otherwise defective module will be identified.
 

joerack

Distinguished
Sep 20, 2012
41
0
18,530
Well that is what the experts did at the pc shop, they tested frst one, then the other module, then together at least this is what they wrote in their report...
They said that after having cleaned all contacts (pc has been left as exposition for a long time so probably it accumulated a lot of dust) they said it was ok, but it wasn't... I can't even install the O.S without it erroring out.
I'm a bit at a miss, I can't open the pc or I will lose the warranty