It doesn't even boot to bios, just a black screen with fans going. The leds flash pretty much at the same time, though the CPU goes on slightly before the DRAM and they both flash relatively quickly on and off.
The weird thing is that if I change the slots my ram is in, it boots up fine and works perfectly, but it will do it again later when I try boot up my pc (though not consistently, sometimes I'll get it started a couple times no problem before it acts up, and other times it'll do it right away)
I've tried restoring the settings on bios to default and then turning on a-xmp from there, but no luck.
My pc is as follows:
CPU: Ryzen 5 1600 (with stock cooler)
GPU: gtx 1060 6gb
Motherboard: MSI b350 pcmate
Ram: 16gb (2x8)
Hard drives: 1tb wd blue (hdd) and 500gb wd green (ssd)
Power supply: Antec HCG750 gold
My 2 ram sticks are from different manufacturers (Ballistix and Corsair) as I got the second a while after the first and couldn't get hold of the same stick, but they're the same speed etc, so the should be compatible as far as I'm aware but idk. Any help would be greatly appreciated
The weird thing is that if I change the slots my ram is in, it boots up fine and works perfectly, but it will do it again later when I try boot up my pc (though not consistently, sometimes I'll get it started a couple times no problem before it acts up, and other times it'll do it right away)
I've tried restoring the settings on bios to default and then turning on a-xmp from there, but no luck.
My pc is as follows:
CPU: Ryzen 5 1600 (with stock cooler)
GPU: gtx 1060 6gb
Motherboard: MSI b350 pcmate
Ram: 16gb (2x8)
Hard drives: 1tb wd blue (hdd) and 500gb wd green (ssd)
Power supply: Antec HCG750 gold
My 2 ram sticks are from different manufacturers (Ballistix and Corsair) as I got the second a while after the first and couldn't get hold of the same stick, but they're the same speed etc, so the should be compatible as far as I'm aware but idk. Any help would be greatly appreciated