So i just bought a new cpu and motherboard but i changed plattforms, a intel cpu for a ryzen cpu and did a complete reinstall of my windows OS with all the other drives disconected except my ssd. The problema is that when i conected the pc and booted it up it booted, but didnt gave me gignal in my monitor. I changed display port to hdmi and then it started working, i installed windows fine, and every app i wanted. I even watch some youtube. But then i wanted to OC the memory to 3600 mhz and cl15 just like the manufacturer specifies on the product and tried to enable smart access memory so i disabled csm in the bios. When i did that i saved and exit and it didnt gave me signal again and both ram and cpu red light are on now. I dont know what to do, i tried removing the cmos battery and nothing, conecting both cmos jumper pins to reboot it, and nothing. I thought it was the ram OC, but the cmos battery reset should have solved that i guess...
PLS HELP.
SYSTEM SPECS:
ryzen 5 5600 with id cooling se 224 xt
Asrock b550m pro4
Rx 5600 xt saphire pulse
2x8 gb patriot viper steel 3600mhz ram
2 ssds
2 hdds
Psu xfx 650 w 80 plus bronze
PLS HELP.
SYSTEM SPECS:
ryzen 5 5600 with id cooling se 224 xt
Asrock b550m pro4
Rx 5600 xt saphire pulse
2x8 gb patriot viper steel 3600mhz ram
2 ssds
2 hdds
Psu xfx 650 w 80 plus bronze