Question Pc not working

[Dredi]

So about a week ago i bend the pins on my 1151 socket Motherboard which caused the Monitor, Mouse and Keyboard to not work when booting up the PC. Since then i was using my setup with a laptop so i know that my monitor, mouse and keyboard are fine. Today i got a new motherboard i switched it out and hoped to get the PC to work again but its still the same my monitor mouse and keyboard still dont seem to work with my PC. Im not sure what is wrong, ive tried to reset the bios, i tried to reseat my Ram sticks ive tried to use only 1 ram stick at a time i have tried to remove the cmos battery and the 30s power on button trick and i have tried multiple times to do a powercycle but nothing does work for me. Do you have a idea what can fix that problem? My PC specifications: Cpu: I7-6700k
GPU: Gigabyte gtx 1060 6gb
Motherboard: B150M-A
Crucial Ballistix Sport LT 2x8gb
PSU: Corsair 750W

 

[logainofhades]

It is possible that your bent pins shorted your CPU, killing it.

 

[Dredi]

It is possible that your bent pins shorted your CPU, killing it.

Is there a way to check that without having a second CPU?

 

[logainofhades]

Have your verified no bent pins, on the new motherboard? Only way to check if the CPU dead is to either try a different CPU, in the board you just bought, or to place your current CPU in a known working board.

 

[Dredi]

I didnt see any bend pins, in that case i will try to see a technician thank you for taking your time and anwsering my question