I've seen that a lot of posts ask this question, but I haven't seen any working answer.
Yesterday, I finished building my new PC, and when i tried to boot, nothing... So i make sure everything is plugged in right, and spend a good hour trying to figure out what is wrong until i try to boot with only on stick of ram (i'm using 2x8gb g.skill ripjaws x 2400) and voila! it boots up. So then i tried with different configurations and i saw that it only works with one stick, doesn't matter which of the two sticks, and doesn't matter what slot you put it in, but it doesn't work with two, (tried it both a1-b1 and a2-b2). Some posts recommended to enable xmp, but that didn't do it for me. So my question is, is there any setting or anything i have to do to enable double channel?
Btw, i have an asrock z97 pro 3 (which is in the list of supported motherboards on g.skill's website) and like i said above, g.skill ripjaws x 16gb (2x8) 2400.My PSU has 500w, and i don't have a GPU, so i don't think that's the problem.
Thanks in advance for reading this post
Yesterday, I finished building my new PC, and when i tried to boot, nothing... So i make sure everything is plugged in right, and spend a good hour trying to figure out what is wrong until i try to boot with only on stick of ram (i'm using 2x8gb g.skill ripjaws x 2400) and voila! it boots up. So then i tried with different configurations and i saw that it only works with one stick, doesn't matter which of the two sticks, and doesn't matter what slot you put it in, but it doesn't work with two, (tried it both a1-b1 and a2-b2). Some posts recommended to enable xmp, but that didn't do it for me. So my question is, is there any setting or anything i have to do to enable double channel?
Btw, i have an asrock z97 pro 3 (which is in the list of supported motherboards on g.skill's website) and like i said above, g.skill ripjaws x 16gb (2x8) 2400.My PSU has 500w, and i don't have a GPU, so i don't think that's the problem.
Thanks in advance for reading this post
