PC Power On Help

[Tfoulke]

So my system was working fine. I then installed my Nzxt grid+ and now my pc will not power on. I disconnected it, removed and reinstalled my 24pin and 8pin cpu connector and it booted. After shuting down the pc again and attempting to power it back on to finish updates, it will not power on again. Any help is greatly appreciated.
System specs:
Asrock ab350 pro4
Ryzen 5 1600
Trident Z 2x 8gb 3200mhz
Gtx 1070
Corsiar Cx750m

 

[RebelEdits]

Do you get any signs of boot? Fans spinning, led flashes, lights, or etc? Or does nothing happen at all?

 

[Tfoulke]

No, nothing at all also tried to short the pins. The only sign of life is the power indicator on my graphics card.

 

[RebelEdits]

No, nothing at all also tried to short the pins. The only sign of life is the power indicator on my graphics card.

Do you have another PSU around to test Maybe? Sometimes a PSU can become a real pain in the ass. Luckily if it is your PSU Corsair usually has a really good warranty program and you can always send it in and receive another in the mail. If another PSU doesn't so the trick then I would start pointing fingers at the motherboard and then going from there. Sounds to me though that installing the grid+ you either shorted the power supply or shorted the motherboard. May not be on your end. Sometimes it just happens.