[SOLVED] PC powers ON but Not Booting/No Display

NaiteRyder

Distinguished
Nov 22, 2015
54
0
18,540
CPU AMD 8350
GPU msi radeon r9 290x
MoBo Asus m5a97 evo r2.0
RAM corsair 2gbx2, 4gbx2 = 12gb
PSU corsair 750W

I face this issue sometime. When I press power button , PC turns ON, all the fans are running but the no boot happens (the Load LED does not blink) and no display. Again I try few times still the same issue is there. Then I try turning Off everything and wait for 2 mins and if I power ON it starts working as normal. Any guess ?
 
Solution
The problem maybe from the mixed RAM you used. Or ocing problem if you oc the cpu. Or something else.

First, you can try to use either the 4GB x2 or 2GBx2 to boot the PC to see what happens, remember: after remove the RAM, clear the CMOS before you boot the PC. Usually we don't recommend to mix the RAM.
The problem maybe from the mixed RAM you used. Or ocing problem if you oc the cpu. Or something else.

First, you can try to use either the 4GB x2 or 2GBx2 to boot the PC to see what happens, remember: after remove the RAM, clear the CMOS before you boot the PC. Usually we don't recommend to mix the RAM.
 
  • Like
Reactions: NaiteRyder
Solution

TRENDING THREADS