PC runs but no display

[Kenneth Lopez]

I have a fresh new build that had an h110 motherboard, g4560 dual core Pentium, a 400w psi, a 1tb hard drive, a gtx 1050ti, 8gb gskill ram 228 pin I believe. It fits the boards I got. I had built it and started it up. I got no response from the display. I tried multiple displays and multiple cables. Nothing. I looked into this and found that the processor was not compatible with my mono. This led me to buy a different one. Now I installed my new gigabyte h110m-a. I still get nothing. I checked that everything was properly seated I and disconnected and reconnected everything twice. I'm very frustrated at this given that everything does turn on. My fans, my power button led, and my graphics card a cpu fan turns on too. I don't know what to do other than set the damn thing on fire now!

 

[Sean_W]

Is there one or two sticks of RAM? If two, try removing one and booting. If that works, place the second stick of RAM in a different slot. If none of the slots work than your MOBO either doesn't support dual channel, or needs it turned on. Or the other slots are dead.

If that doesn't work, I'm not sure.

 

[Zerk2012]

You should of bought a B250 board the H110 needs the latest BIOS version to work with that processor.
http://www.gigabyte.us/Motherboard/GA-H110M-A-rev-10#support-cpu
You could try a local PC shop and see if they can update the BIOS.