PC Specs:
AMD RYZEN 5 5600x
NZXT KRAKEN X53
MSI MPG B550 GAMING EDGE WI-FI
Corsair Vengeance RGB Pro 16 GB (4 x 8 GB) DDR4-3600 CL18 Memory
GIGABYTE AORUS GeForce RTX 3070 MASTER
SAMSUNG 980 1TB M.2
Seagate Barracuda 2TB 7200RPM HDD
Corsair RM750 power supply
Be quiet pure base 500DX case
——————
I’ve recently flashed my BIOS after stability issues which ended up becoming the PC turning on, but no longer showing any display and the CPU EZ Debug light being lit.
I attempted to boot a few times following the flash and would get NO debug lights, but also no display.
I removed CMOS and cleared. Now when I boot the MPG pre-BIOS splash screen comes up and tells me “Press DEL for BIOS setup or F11 to Boot menu. Press CTRL+F5 to activate M-FLASH”
The problem here is that the PC isn’t taking ANY inputs from my keyboard. I swapped keyboards to another and same issue. I plugged both keyboards into a working laptop and they function as intended.
I went back to look at the EZ debug lights and now the VGA light is lit. Every boot cycle goes through the same where I will reach the pre-BIOS screen, VGA light is lit, and that’s as far as I can get. I’d accept the VGA being the issue if it wasn’t showing me a display, but it is.
Does anyone have any recommendations/insight? TIA!
AMD RYZEN 5 5600x
NZXT KRAKEN X53
MSI MPG B550 GAMING EDGE WI-FI
Corsair Vengeance RGB Pro 16 GB (4 x 8 GB) DDR4-3600 CL18 Memory
GIGABYTE AORUS GeForce RTX 3070 MASTER
SAMSUNG 980 1TB M.2
Seagate Barracuda 2TB 7200RPM HDD
Corsair RM750 power supply
Be quiet pure base 500DX case
——————
I’ve recently flashed my BIOS after stability issues which ended up becoming the PC turning on, but no longer showing any display and the CPU EZ Debug light being lit.
I attempted to boot a few times following the flash and would get NO debug lights, but also no display.
I removed CMOS and cleared. Now when I boot the MPG pre-BIOS splash screen comes up and tells me “Press DEL for BIOS setup or F11 to Boot menu. Press CTRL+F5 to activate M-FLASH”
The problem here is that the PC isn’t taking ANY inputs from my keyboard. I swapped keyboards to another and same issue. I plugged both keyboards into a working laptop and they function as intended.
I went back to look at the EZ debug lights and now the VGA light is lit. Every boot cycle goes through the same where I will reach the pre-BIOS screen, VGA light is lit, and that’s as far as I can get. I’d accept the VGA being the issue if it wasn’t showing me a display, but it is.
Does anyone have any recommendations/insight? TIA!
Last edited: