PC stopped booting properly after failed OC

[Mainey]

Hello my pc has a problem that it doesn't boot properly anymore after a failed oc I did lol. Okay I use to be able to just press the power button and boot properly before the oc then after I just have this problem where it won't boot. I would have to keep flipping the power switch on and off till it eventually boots up. (like a 30sec - min process)

I been having this problem for about a month now and yeah I decided I need some help now. All my bio settings are back set to default except my ram and ram voltage (cause I have 2400 mhz ram)

Here are my specs:
i5-4690k
CM Hyper Evo 212
Gigabyte GA-Z97-D3H ATX LGA1150 Motherboard
Corsair Vengeance Pro 16GB (2x8GB) DDR3 2400MHz
1tb WD Blue
Samsung 850 Evo 250gb SSD
EVGA 1070 SC
SeaSonic 550 Watt Gold

 

[Hlsgsz]

Do a load defaults in teh BIOS, don;t mess with any settings(including ram) and see how it fares.

 

[Sinistercr0c]

Look at how to clear CMOS settings in your motherboard manual, basically in most cases its remove the battery and set a jumper on the mobo to its alternate position then back and then re-insert the battery. This clears any and all settings in BIOS and is effectively a hard reset of BIOS back to its default factory settings.

 

[Mainey]

Do a load defaults in teh BIOS, don;t mess with any settings(including ram) and see how it fares.

okay I'll look into that

 

[Mainey]

Look at how to clear CMOS settings in your motherboard manual, basically in most cases its remove the battery and set a jumper on the mobo to its alternate position then back and then re-insert the battery. This clears any and all settings in BIOS and is effectively a hard reset of BIOS back to its default factory settings.

yeah I've actually already done a cmos clear I forgot to say that

 

[Sinistercr0c]

Have you tried reseating the motherboard connector for the power switch. There are usually a bundle of connectors for front panel HD light, power etc. that connect to your motherboard....this might have a marginal connection on the power switch connector?

 

[Mainey]

Have you tried reseating the motherboard connector for the power switch. There are usually a bundle of connectors for front panel HD light, power etc. that connect to your motherboard....this might have a marginal connection on the power switch connector?

no I have not I'll try and look through it and replug everything when I have the chance