PC to TV via VGA

Status
Not open for further replies.

tacohead

Distinguished
Mar 10, 2008
105
0
18,690
1
Hi,

I just got a fancy new lcd tv with a vga cable at the back so I bought a cable to connect it to my pc. When I boot up in vista as soon as vista kicks in it'll change to "no input" on the tv but when I started in xp, It'll load on the tv then the pc will get "no input", any ideas? I'm using hd4850 if that matters.
 

knotknut

Distinguished
Aug 13, 2007
1,218
1
19,310
12
You bought an analog TV. Is your PC video interface VGA, DVI,HDMI. Which one(s)?
Chances are in Feb you wont get TV signals either without a converter of some type.

NM, I see you have DVI= Digital Signal

Exchange the TV. Didnt they tell you it was analog? It is required by law to disclose to the customer if it is compliant with the new regulation.
 

tacohead

Distinguished
Mar 10, 2008
105
0
18,690
1
Ok well I got it to display by entering catalyst manager and it's now a second monitor but I can only see the desktop background, no mouse or icons or anything else will load up.

This is the tv I got
http://www.konka.co.nz/productdetail.php?id=33

edit: I did the same to xp and it's basically in reverse. I can see everything moving on the tv in xp but my pc monitor will just display desktop and in vista I can see it on the pc monitor but my tv will just display desktop.
 

knotknut

Distinguished
Aug 13, 2007
1,218
1
19,310
12
That TV should work fine. Sorry if I misled you. Why are you not using the HDMI? You can either buy a conversion cable DVI to HDMI or a DVI to HDMI adaptor and a HDMI cable. Your problem should be solved. In the menu on the TV it should have a PC option, right? Try look.
 

tacohead

Distinguished
Mar 10, 2008
105
0
18,690
1
HDMI cables were like $40 minimum and this vga was only $12 :) I also only have 1hdmi slot in the back and using that for dvd, any way to turn that 1socket into 2 like with a plug splitter? I might have to try that dvi> hdmi cable if that's the case. Yeah my remote has a pc option, that's what I'm using to view it.

It's weird how it's not loading anything, just desktop :(
 

Wolfshadw

Titan
Moderator
In Catalyst Control Center, you have the two "monitors" set up in Extended Mode. Either you'll want to change this to Clone mode (same desktop/icons on both monitors) or leave it at Extended mode and manually move icons over to the second desktop.

Concerning your XP Reversed issue, it's just a matter of identifying each monitor (1 or 2) and switching them.

-Wolf sends
 

Zenthar

Distinguished
Dec 31, 2007
3,248
0
20,960
61
You can get HDMI/DVI cables quite cheap on the web, it will save you tons of trouble since the signal will be digital. One of many thing could be happening with the VGA cable, my guess is that either your PC resolution or the refresh rate is too high (would have scaled automatically if you had used digital cables).
 

tacohead

Distinguished
Mar 10, 2008
105
0
18,690
1
Thanks guys

Wolf it was in extended mode so switched to clone and it's working as I wanted now. I will get a couple dvi > hdmi and an hdmi cable as the display on my lcd isn't looking to sharp.

Thanks a lot guys!
 
Status
Not open for further replies.

ASK THE COMMUNITY

TRENDING THREADS