Pc turns on fans spin but no display

[davve0210]

I build my new pc yesterday when all the parts arived but when everything was plugged in and started running my monitor gave no signal. The fans and the led went on but not the display, like it dident boot
The specs are
Amd Ryzen 3 1200 cpu
Asus prime B350m-a motherboard
Balistix 8GB 2x4 2666hz RAM
eclipse p300 case
Evga 600w white powersuply
Nvidia gt 1030 2gb
i know its not the best of the best but it meets my requirements. Please help i need to get it to work

 

[Froberg]

Make sure your RAM is properly seated. Try booting with a single stick if necessary. Other than that it's making sure that the BIOS version on your motherboard supports the CPU, that the CPU doesn't draw more power than the motherboard can provide etc.

 

[madmatt30]

Your monitor is plugged into the gt1030 & not the motherboard ports ?

 

[davve0210]

Make sure your RAM is properly seated. Try booting with a single stick if necessary. Other than that it's making sure that the BIOS version on your motherboard supports the CPU, that the CPU doesn't draw more power than the motherboard can provide etc.

Your monitor is plugged into the gt1030 & not the motherboard ports ?

yes & i've tried to plugg it trought the motherboard too and no sucess

 

[madmatt30]

Well the motherboard connector would give no signal


8 pin (4+4) atx connected (top left of cpu)??
Make sure you haven't used a pc I express 6+2 cable by mistake (people have managed to cram these in in the past)

Try 1 stick ram only in slot nearest cpu

Where do you have the case fans plugged ? Motherboard or into the cases fan controller ?

 

[davve0210]

Well the motherboard connector would give no signal


8 pin (4+4) atx connected (top left of cpu)??
Make sure you haven't used a pc I express 6+2 cable by mistake (people have managed to cram these in in the past)

Try 1 stick ram only in slot nearest cpu

Where do you have the case fans plugged ? Motherboard or into the cases fan controller ?

The 8 pin is a 4+4 i have not toutched the 6+2 and i have tried to boot with one stick as you said (it would not work) and the fans are plugged in to the motherboard,