PC won't BOOT AFTER CLEANING

[RAPTOR-6]

A week ago I cleaned my pc with a compressor. I took it autside and get it a clean (it's 10 years old). Now it stoped working. Tested everything, still won t boot. The screen output is like this:

https://drive.google.com/open?id=0BwXIWR1_n_RpTjZzaWY1VElLWnc

 

[gussrtk]

I don't know of any solution for you.

but, I've had an old PC that when i unplugged from all wires, it always never wanted to boot up. I would say, try uplugging and replugging the motherboard connector from PSU, and make sure other connections are tight (the vital ones). in this case the system specifies your GPU? Try resetting the GPU physically

 

[weberdarren97]

Please power down the machine, unplug it and press the power button for three seconds to drain any remaining power. After that, open it up and remove the CMOS battery from the motherboard. Also remove all connectors from all devices and plug them back in nice and tight. Remove all devices from the motherboard (except CPU) and put them back into place. Now put the CMOS battery back into the motherboard, plug it in, turn it on, boot into BIOS and set the system time. After setting the time, reboot into Windows.

 

[Tradesman1]

If no joy with the above, may want to bench it, might have gotten something under the mobo or in a slot:

http://www.tomshardware.com/faq/id-1753671/bench-troubleshooting.html

 

[RAPTOR-6]

I tried everything above, but it didn t help. Is benching my best bet?

 

[weberdarren97]

Have you tried taking out the motherboard and putting about ten pieces of paper behind it so that it can't short out against the case?

 

[Tradesman1]

Benching would be my thought, can troubleshoot all outside the case