So I was using my PC and everything is okay. I had to leave it for w hole because my dog. When I came back, as usual the screen was blank because it auto sleeps. After that of course, as usual, I press a button on my keyboard and mouse and nothing happens. So I was shocked. I tried a few more time on just clicking/typing then waiting but it wont open. So I turned off my PC. When I turned it back on the power light just kept on blinking (not the normal booting blinking, just blinks constantly) and my screen was just blank, I waited but after a while like 10 seconds of just waiting for at least anything to appear on my screen, I turned it off again. Then comes my problem, my PC won't boot anymore even to BIOS.
I did basic trouble shooting, checking my monitor, removing components (RAM, hard drive etc.), CMOS reset, removing all connections to the PSU. And still the same.
So the now current stated of my PC is this:
1. Power is on, it appears on my motherboard when it is plugged.
2. When I turn it on, power light doesn't blink like it normally does when booting. It's just on.
3. When I open the casing after turning it on, everything is running.
4. No errors code in motherboard.
5. Power doesn't go on and off when opened. It's just open but doesn't do anything.
6. Screen is just blank when I turn it on. My monitor goes to power saver mode because it doesn't detect anything.
My current prime suspect is my PSU, but I am hoping that isn't the problem. That was the only one I wasn't able to troubleshoot because I don't have an extra PSU.
If you have any more fix I can try will be great.
My PC's build:
MoBo: Gigabyte Z87X-UD3H
PSU: Seasonic M12 Bronze II, EVO Edition
CPU: Intel i5, 4th Generation
I did basic trouble shooting, checking my monitor, removing components (RAM, hard drive etc.), CMOS reset, removing all connections to the PSU. And still the same.
So the now current stated of my PC is this:
1. Power is on, it appears on my motherboard when it is plugged.
2. When I turn it on, power light doesn't blink like it normally does when booting. It's just on.
3. When I open the casing after turning it on, everything is running.
4. No errors code in motherboard.
5. Power doesn't go on and off when opened. It's just open but doesn't do anything.
6. Screen is just blank when I turn it on. My monitor goes to power saver mode because it doesn't detect anything.
My current prime suspect is my PSU, but I am hoping that isn't the problem. That was the only one I wasn't able to troubleshoot because I don't have an extra PSU.
If you have any more fix I can try will be great.
My PC's build:
MoBo: Gigabyte Z87X-UD3H
PSU: Seasonic M12 Bronze II, EVO Edition
CPU: Intel i5, 4th Generation
Facebook
Twitter
Instagram