Question PC won't boot into Windows 10 after motherboard BIOS update ?

[zillah]

Dear Experts

I have got an ASRock Z390 PHANTOM GAMING 6 Motherboard on which I have upgraded the BIOS
from P1.6 to P4.30G,,,,,update was successful following instructions in the link below
Now I am stuck in new BIOS I can't get it to Windows 10

https://asrock.com/support/BIOSIG.asp?cat=BIOS9

I have removed CMOS battery but still no joy.

I can't find an options for choosing my SSD hard drive (below link has 4 snapshots)

https://imgur.com/a/snfftwx

View: https://imgur.com/a/snfftwx


Thanks for help

 

[helpstar]

eventually set csm to compatibility mode, windows might not be installed in uefi mode

 

[zillah]

Thx helpstar

link below has two images

https://imgur.com/a/2sZtfqd

View: https://imgur.com/a/2sZtfqd#pd9yjBV


Isn't enabled ? Or Do you I need to do something else ?

 

[helpstar]

then disable it

 

[zillah]

Will do that

 

[SkyNetRising]

I can't find an options for choosing my SSD hard drive (below link has 4 snapshots)

What is model name of your SSD?
Is it SATA drive?
Is it M.2 NVME drive?

Make sure your SSD is being detected in BIOS first.
If it is not detected, then it will not be possible to boot form it.

Check Sata controller settings. It should be set to AHCI.
Make sure Intel RST is disabled and
Fast boot is disabled.

 

[zillah]

Thx SkyNetRising
I will check model for the SATA SSD 2.5 inch drive

Check Sata controller settings. It should be set to AHCI.
Make sure Intel RST is disabled and
Fast boot is disabled.

Noted will try that